Hey all, been to a new client today who would like to have lighting such as small led's installed in stairwell between stairs themselves which could be a hassle due to access !
stairs are accessible only up to around 5 stair via cupboard underneath then they turn 90 degrees and up to the landing.
Pretty standard staircase I'd say as in just diagonal cut wood side all the way up against wall side on an external block wall, not seen inside switches yet to check if looped at switch or from jb system although thinking probably the latter so likely a good deal of chasing works.
Or has anyone used any kind of led tape / strip that doesn't sit surface and look awful etc.. and runs along edge of carpet / wall
alternatively something like the under lip along length of each stair kind of thing horizontally ?
Any knowledge / ideas very helpful,
Thanks.
stairs are accessible only up to around 5 stair via cupboard underneath then they turn 90 degrees and up to the landing.
Pretty standard staircase I'd say as in just diagonal cut wood side all the way up against wall side on an external block wall, not seen inside switches yet to check if looped at switch or from jb system although thinking probably the latter so likely a good deal of chasing works.
Or has anyone used any kind of led tape / strip that doesn't sit surface and look awful etc.. and runs along edge of carpet / wall
alternatively something like the under lip along length of each stair kind of thing horizontally ?
Any knowledge / ideas very helpful,
Thanks.
