I am just lost for words.......

EWP · Jul 26, 2017

westward10 · Jul 26, 2017

EWP said:
This how it should be done.

What fitting wonky breakers

Des 56 · Jul 26, 2017

EWP said:
It just a pictured shared by our trainer on what some mupets do.

There is certainly a Muppet award for making a shower room around those boards
Builders eh

Deleted member 26818 · Jul 26, 2017

Not sure I like the busbar being exposed like that.

westward10 · Jul 26, 2017

spinlondon said:
Not sure I like the busbar being exposed like that.

The shield is laying in the bottom of the board.

Deleted member 26818 · Jul 26, 2017

The heights of the conductors into the RCDs are different, Neutral is higher than line.

Dave OCD · Jul 26, 2017

spinlondon said:
The heights of the conductors into the RCDs are different, Neutral is higher than line.

Factory links designed that way so they have clearance to cross over each other at the back of the enclosure. You should get out more.

sparkdog · Jul 26, 2017

Obviously an "Electric" shower.

davesparks · Jul 27, 2017

EWP said:
This how it should be done.

I wouldn't say that's how it 'should' be done, it's a reasonable attempt but I wouldn't accept it.

LewisM · Jul 27, 2017

EWP said:
This how it should be done.

You didn't do this one as well by any chance?

http://i.Upload the image directly to the thread.com/ME6NCxZ.jpg

GMES · Jul 27, 2017

Obviously done by a plumber, here are some switches his mate
did in the same room.

a-z electrics · Jul 29, 2017

Well it's the right way round to let the water run out.. come on give the lad some credit

a-z electrics · Jul 29, 2017

....also negates the need to put guttering under the bus bar....