How much would you charge to install RGB LED strip lighting? | on ElectriciansForums

Discuss How much would you charge to install RGB LED strip lighting? in the Lighting Forum area at ElectriciansForums.net

Joined
Oct 10, 2017
Messages
9
Reaction score
1
Location
London
Hi all,

I have two rooms with suspended ceilings in which I need to run 25 metres of RGBW strip lighting in (RGB plus Cool White) plus another 15 metres of the same in another room (please see pictures).

Both circuits will include 2 drivers, 1 controller and 1 amplifier. This will all be connected to the mains wiring (already wired in both rooms so are ready for connection).

The strip lights have come in 5 meter reels so the joints will also need to be cut and soldered accordingly.

Now my question is how much would you charge to set up these LED strip lights in both rooms?

Many thanks.

[ElectriciansForums.net] How much would you charge to install RGB LED strip lighting?

[ElectriciansForums.net] How much would you charge to install RGB LED strip lighting?
 
There is LED tape and cheap tape with no extrusion/diffuser you get what you pay for. Cheap drivers won’t last and the colour effect may be poor. Always check the specification suggest speaking with a reputable tape supplier like Monoled, stuff from the diy centers will always end up with a compromised install. However we pay the money and make the choice. Good luck.
 
There is LED tape and cheap tape with no extrusion/diffuser you get what you pay for. Cheap drivers won’t last and the colour effect may be poor. Always check the specification suggest speaking with a reputable tape supplier like Monoled, stuff from the diy centers will always end up with a compromised install. However we pay the money and make the choice. Good luck.

Thank you for the advice.
 
I guess it would take about four hours at ÂŁ35.00 per hour. ÂŁ140. You say solder but normally you can get connectors that pierce and join which I would assume would be the case? That would be just connecting and placing the LED strips. From what you say everything else is in place?
 
I guess it would take about four hours at ÂŁ35.00 per hour. ÂŁ140. You say solder but normally you can get connectors that pierce and join which I would assume would be the case? That would be just connecting and placing the LED strips. From what you say everything else is in place?

Finally someone who has actually answered the question lol. Thank you very much for your suggestion. Yes everything is in place. It all just needs to be connected.
 

Reply to How much would you charge to install RGB LED strip lighting? in the Lighting Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
299
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
808
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
857

Similar threads

Hi all, I have a couple of questions I'm hoping you can help with. I have put a solar panel on my kids play house which charges a 12v battery. I...
Replies
0
Views
363

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top