What cable type is this? SWA? | on ElectriciansForums

Discuss What cable type is this? SWA? in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

jon557

-
Joined
Jun 15, 2017
Messages
20
Reaction score
0
Location
Portsmouth
Hi folks,

My building has a lighting circuit for the car parking area, the outside cabling is primarily a thin ridged (what looks like 1.5mm core) white cable. It basically looks like a form of shielded cable but not braided, it looks like a solid metal tube. Does anyone recognise it? if I eventually upgrade the fuse board to a modern consumer unit does it all need ripping out?

Thanks!

[ElectriciansForums.net] What cable type is this? SWA?
 
Hi folks,

My building has a lighting circuit for the car parking area, the outside cabling is primarily a thin ridged (what looks like 1.5mm core) white cable. It basically looks like a form of shielded cable but not braided, it looks like a solid metal tube. Does anyone recognise it? if I eventually upgrade the fuse board to a modern consumer unit does it all need ripping out?

Thanks!

View attachment 38826
MICC, Pyro Proper cable used to be installed by Proper Electricians, that install is a right mess, whoever did it want's to be pilloried, a disgusting example of today' s I#ll say tradesmen with my fingers crossed, and as for not knowing what it is, well.
 
MICC, Pyro Proper cable used to be installed by Proper Electricians, that install is a right mess, whoever did it want's to be pilloried, a disgusting example of today' s I#ll say tradesmen with my fingers crossed, and as for not knowing what it is, well.

Further on from this cable an extension says the brand "Pyrotenax", it's orange. I don't like the termination and really don't like the white flex that then goes into the fuse board, currently noting all the improvements needed. This building was put up in 1985 so I am guessing this connection is about that old.

You seem to be not impressed that I didn't know what it was, well I have only just done my domestic installers course a few months back and I have yet to see all the variants of cable throughout time - I'll get there, everyone has to learn. I have a degree in electronics but practical domestic installations I am still picking up.

Cheers.
 
No one was criticising you but to gland that cable correctly the existing pot, the barrel bit will need removing to fit the gland then a new pot fitted and the time clock shifting down a bit. The other cable can be glanded correctly to tidy it up.
 
Last edited:

Reply to What cable type is this? SWA? in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
270
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
763
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
765

Similar threads

  • Question
All the lamp post cutouts I've ever seen have a twin swa gland plate built in to the base.
Replies
2
Views
632
loz2754
L
Yes the first bit is just standard wiring, TNS lead cable into cut-out, cut-out to meter, meter to DP isolator, top of isolator is sealed as per...
Replies
8
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top