Wall Anchor Tool Required? | on ElectriciansForums

Wall Anchor Tool Required?

Post new thread

Discuss Wall Anchor Tool Required? in the Electrical Tools and Products area at ElectriciansForums.net

P

Pete E

-
DIY
Joined
Apr 6, 2014
Messages
222
Reaction score
113
Location
N Wales
A friend borrowed my Wall Anchor Tool and its now buggered...

This was only a cheap Silverline item and probably hasn't been used on more than a dozen fixings in its life.

Looking at it, it seems one of the rivet's that act as a pivot as been ripped out of the wall of tool...

I know Silverline is cheap nasty stuff, but most of the other tools I've seen on line look exactly the same, and I suspect are mass produced in the same Chinese factory.

So does anyone know of a decent quality tool for the job?

Regards,

Peter
 
Ive never used the tool to set them in. I use a battery drill set on a low torque setting and screw them so the anchor opens and grips and then reverse the screw back out.
Just make sure the spikes are firmly set in the plaster board and don’t let the anchor spin round
 
Never found setting tool much use, agree with KEV to use drill. However, there are just so many types of anchor I get confused as to which type to use, especially into plasterboard. I guess it's all to do with the expected load etc but I have at least six different types in my bag that I use frequently, and another 6 or so odd ones to get me out of trouble when the wall is difficult, or I have bodged the first attempt. What are you favourite ones?
 
I mainly use these for fixing light loads to plaster board walls, but if the plaster board is soft, they just spin....
[ElectriciansForums.net] Wall Anchor Tool Required?
....I’ve seen kitchen units and spur shelving put up with these:eek:

These are useful for heavy loads but you can’t take the screw back out....
[ElectriciansForums.net] Wall Anchor Tool Required?
 
KEV 1 N said:
I mainly use these for fixing light loads to plaster board walls, but if the plaster board is soft, they just spin....
View attachment 40321
....I’ve seen kitchen units and spur shelving put up with these:eek:
Click to expand...

I've used those a lot over the years and quite like them for light loads although I have put up shelves in an airing cupboard and they have held quite a good weight...

With regards soft plasterboard, If working at home or where I have the time, I have primed the hole with glue and effectively glued the plug in before placing the screw. Its not the complete answer but it helps a lot.
 
It's a "metal driva" and very secure as it is a clamp-type fitting. As you can see, it is an old screwfix item and I don't think they carry them nowadays. However, you may be able to get them here

Spit Driva Plus Self Drilling Plasterboard Fixing High Performance 12mm c/w Screws Bag of 25 - https://www.bradfords.co.uk/spit-driva-plus-self-drilling-plasterboard-fixing-high-performance-12mm-c-w-screws-bag-of-25-spf111

basically the standard metal one like 2nd from right in the pic, but with the long screw-form body replaced with a toggle. You screw them in, the toggle drops by gravity and then the screw engages in a thread in the toggle, pulling it up tight against the back of the plasterboard.
[ElectriciansForums.net] Wall Anchor Tool Required?
 
I agree, glueing is a way round soft board. Also, if you have overdrilled, or pulled out a screwin plug like the lefthand one in the pic (they leave a big hole!) then this can help
[ElectriciansForums.net] Wall Anchor Tool Required?
You dip the discs in water, squeeze the excess out, wrap around the new plug fixing, using one or more discs as required, and let them set. The excess disc can be sanded off the surface. Not recommended for heavy items though!
 

Reply to Wall Anchor Tool Required? in the Electrical Tools and Products area at ElectriciansForums.net

News and Offers from Sponsors

PCBWay
  • Article
Meet PCBWay at electronica A1.163
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
265
PCBWay
PCBWay
Electrical2go
  • Sticky
  • Article
📢 Best Sellers Catalogue Now Available! 📢
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
756
Bob Labla
B
Dan
  • Article
The Official Sponsors of ElectriciansForums - There are currently 8
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
745
Dan
Dan

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top