Mud Cow
-
Hello all
Took the plunge an have gone for a Hive setup.
Boiler has a mechanical programmer fitted an no other wired/ wireless stat fitted
Removed the bottom panel of the boiler an can see the main feed on the far left.
Then its currently wired as CN CI CL all of these go to the mechanical programmer
I then have RN RI RL with a link between RI & RL
Im planning on removing the programmer an installing Hive in its place. Im told the wiring is...
Hive Live = CL
Hive Neutral = CN
Hive No = CI
Then a wire from Live (supply) to Common on the Hive backplate
Does that sound correct?
I was under the impression it needed a mains supply?
thanks
Took the plunge an have gone for a Hive setup.
Boiler has a mechanical programmer fitted an no other wired/ wireless stat fitted
Removed the bottom panel of the boiler an can see the main feed on the far left.
Then its currently wired as CN CI CL all of these go to the mechanical programmer
I then have RN RI RL with a link between RI & RL
Im planning on removing the programmer an installing Hive in its place. Im told the wiring is...
Hive Live = CL
Hive Neutral = CN
Hive No = CI
Then a wire from Live (supply) to Common on the Hive backplate
Does that sound correct?
I was under the impression it needed a mains supply?
thanks
![[ElectriciansForums.net] Hive Install - Worcester 24I RSF](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/32/32427-91d7ad9f9d5b54a2605c2c09a9c790a2.jpg "[ElectriciansForums.net] Hive Install - Worcester 24I RSF")
