What do we need RCDs fit anyway... | on ElectriciansForums

Discuss What do we need RCDs fit anyway... in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Joined
Feb 1, 2015
Messages
81
Reaction score
9
Location
Cheshunt
Not sure if there is a specific group for posting things like this?

When your RCD stops working this is a much cheaper remedy to the problem..

This issue was quickly rectified for the customer (correctly)

[ElectriciansForums.net] What do we need RCDs fit anyway...
 
Not sure if there is a specific group for posting things like this?

When your RCD stops working this is a much cheaper remedy to the problem..

This issue was quickly rectified for the customer (correctly)

View attachment 41769
Right old cock up is that.
 
Shorting out the RCD for continued operation is something I wouldn't have considered as a method of providing a safe electrical environment for the clients...
Do you know why it might be dangerous? DO you drive a vehicle with wheels or legs?
 
With a very large CSA cable at that!
Is this bypassing the RCD, or just getting a live to the MCB because the bus bar is too short?
What is that cable covered in black tape in the RCD Neutral?
 
Just to clarify. This is how I found the board, not sure if my sarcasm came over correctly in my post. I hope no one thinks I was suggesting this was actually my remedy.

I have put a new RCD in. It is a temp fix as it is not a Volex RCD as I’m struggling to find a source for a Volex brand? Can anyone suggest a compatible brand or should this be a complete board change if Volex no longer exist (surely not tho?)
Shorting out the RCD for continued operation is something I wouldn't have considered as a method of providing a safe electrical environment for the clients...
Do you know why it might be dangerous? DO you drive a vehicle with wheels or legs?
 
Is this bypassing the RCD, or just getting a live to the MCB because the bus bar is too short?
What is that cable covered in black tape in the RCD Neutral?

The RCD has been bypassed because it wasn’t working so non of the socket circuits were protected.

I found it by chance because I was there to do an unrelated job
 

Reply to What do we need RCDs fit anyway... in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
265
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
756
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
746

Similar threads

Thanks for the reply littlespark. Yes the works have been carried out. Surely it is fraudulent because basically the document is Not...
Replies
2
Views
706
I usually put something like this To assess compliance with BS7671 for continued safe operation (5 year periodical inspection)
Replies
8
Views
438

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top