A Post Found On Facebook | on ElectriciansForums
Guest viewing is limited

Discuss A Post Found On Facebook in the UK Electrical Forum area at ElectriciansForums.net

JK-Electrical

-
Arms
Joined
Sep 15, 2015
Messages
1,017
Reaction score
1,553
Location
Glasgow
My apprentice found this post on a Facebook group:

Last week we were called to a house to swap a couple of pendants for customers' own lights. Easy peasy, or so we thought. After changing the hall light (aboout 1.5 metres from the CCU in the cloakroom, none of the ground floor lights would work. Checked and found that the neutral in the cable from the CCU to the hall light had somehow disconnected somewhere along its length. Cut it back as far as possible and still no joy. The (chipboard) floor above the light is the tiled bathroom floor and above the CCU is the airing cupboard with the hot water tank, and masses of pipes, so no access from above to replace the cable. The only option was to cut holes in the ceilings, but the customer said that he was having the tank and pipework removed in a couple of weeks which would allow us access, so as a temporary measure (to get them some downstairs lighting) I connected the neutrals in the hall light to the CPCs (16th editon board, so no RCD). Left them working and now just had a text to say that the ground floor lights have stopped working and nothing has tripped. back there tomorrow to see what has happened now. Possibly the live is now disconnected? Never known anything like this before.
 
[ElectriciansForums.net] A Post Found On Facebook Mind boggling...
 
Last edited:

Indeed so, Wilko. More mind-boggling still is that the guy who made this post is an NICEIC Approved Contractor and Domestic Installer. He's also a Which trusted trader. I find it absolutely astonishing that someone who purports themselves to be an approved electrician would even begin to contemplate connecting a neutral conductor to CPC conductors let alone go ahead and actually do it. Shame on you, you prize idiot. You are a disgrace to our trade.

Faced with the same scenario, I would have told the customer that the circuit needs to be rewired, and that if they prefer to wait two weeks rather than have the job done now, then they will have to plug in a lamp, use a torch, buy some candles, or grope around in the dark.
 
Probably going to sound a prize idiot myself but does this mean the N and E will now be carrying the same potential which of course would've tripped if it was RCD protected but now its a dangerous circuit.
 
How about posting up the post from facebook.

I would be more than happy to do so as long as I'm not breaking any forum rules. The guy's name and the name of his business are on display. Advice please.

If it's okay to proceed, I'll ask my apprentice to grab a screenshot as I don't have a Facebook account.
 

I would be more than happy to do so as long as I'm not breaking any forum rules. The guy's name and the name of his business are on display. Advice please.

If it's okay to proceed, I'll ask my apprentice to grab a screenshot as I don't have a Facebook account.

That would be down to the MODs to advice.
 
surely the common sense solution would have been some plug in lamps or lights on the downstairs sockets!? It amazes me how some people stay in business or avoid a prison cell for dangerous work as some of the people out there are proper dangerous cowboys.

While I would expect such work from clueless cowboys, I would not, however, expect an NICEIC approved contractor to connect the neutral conductor of a lighting circuit in with circuit protective conductors. What on earth was he thinking? Would the NICEIC investigate the matter should it come to their attention and consider revoking the contractor's membership?
 
Given the guy has no shame in posting this onto facebook...I wonder what sort of work he has done that he doesn't want to let people know about:fearscream:

....... or the NICEIC when it's time for his assesment!
 

Reply to A Post Found On Facebook in the UK Electrical Forum area at ElectriciansForums.net

Similar threads

  • Question
At this "first" fitting it's loop in. The rest appear to be joint boxes and old par 38 light fittings. It is reasonably old wiring but not...
Replies
3
Views
319
  • Question
And exciting when that Hager AFDD finally tripped 😂
2
Replies
28
Views
2K
nicebutdim
N

Recommended Sponsor News

Quickwire Now Sponsor ElectriciansForums.net

I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!

[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net


@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"

Exclusive Forum Offer! Free euro 2024 wall chart for first 10 responses!

Hi everyone,

We have 10 exclusive Uheat EURO 2024 Wallcharts to giveaway for Electricians Forum Members! The first 10 people to reply YES to this thread - I will message and get them sent out to you just in time for this years tournament! GO GO GO

PCBWay Now Sponsor ElectriciansForums.net!!

I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.

Welcome to the community and thanks for your sponsorship!

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Thread starter

Joined
Location
Glasgow
Website
http://www.jkelectricalservices.com
If you're a qualified, trainee, or retired electrician - Which country is it that your work will be / is / was aimed at?
United Kingdom
What type of forum member are you?
Practising Electrician (Qualified - Domestic or Commercial etc)
Business Name
JK Electrical

Thread Information

Title
A Post Found On Facebook
Prefix
N/A
Forum
UK Electrical Forum
Start date
Last reply date
Replies
22
Unsolved
--
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top