Kootni
-
Hi members
Eurotherm Drive 620 Vector link -which turns on a winder. Trouble is potentiometer just turns on the Winder but extremely slowly and speed does not increase when potentiometer turned. Checked potentiometer and it’s ok - voltage variation out of it is fine.
Do I need to programme the drive to have speed increased when potentiometer turned? If so how do I go about in the drive to set this.
Thanks in advance
![[ElectriciansForums.net] Eurotherm Drive 620 Vector Link](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/34/34071-7cba8e0a5fe54923f8b6c0545d7428a2.jpg "[ElectriciansForums.net] Eurotherm Drive 620 Vector Link")
Eurotherm Drive 620 Vector link -which turns on a winder. Trouble is potentiometer just turns on the Winder but extremely slowly and speed does not increase when potentiometer turned. Checked potentiometer and it’s ok - voltage variation out of it is fine.
Do I need to programme the drive to have speed increased when potentiometer turned? If so how do I go about in the drive to set this.
Thanks in advance
