Hi, im having issues with my hive multizone and getting power to my upstairs receiver. I have 2 zones, upstairs and downstairs. I can only get power to my upstairs receiver when my downstairs heating is on. I have installed a loop wire between live and common in my receiver upstairs but still no power unless downstairs heating is on. Any advice on how to get permanent live to my upstairs receiver is much appreciated. Ta.
Discuss Permament Live to Hive multizone in the Central Heating Systems area at ElectriciansForums.net
phone british grasp. 
.
.
Leesparkykent
Nearly Esteemed
Some pics might helpphone british grasp.
D
davesparks
A competent electrician will be able to fix this.
This is where the main receiver downstairs goes and where my original programmer was
![[ElectriciansForums.net] Permament Live to Hive multizone](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/35/35102-9408a7eecd53c8ee994cb4039f6ad11f.jpg "[ElectriciansForums.net] Permament Live to Hive multizone")
This is where my upstairs stat was and where the receiver for my 2nd zone goes. It is here where i can only get power too when the boiler is on.
![[ElectriciansForums.net] Permament Live to Hive multizone](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/35/35103-8242908442f6e68549f95f7dbd3d000e.jpg "[ElectriciansForums.net] Permament Live to Hive multizone")
![[ElectriciansForums.net] Permament Live to Hive multizone](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/35/35104-02bc5a4933b3a19971efd7f8b0dbbd8a.jpg "[ElectriciansForums.net] Permament Live to Hive multizone")
This is where the thermostat downstairs was.
Thanks
This is where my upstairs stat was and where the receiver for my 2nd zone goes. It is here where i can only get power too when the boiler is on.
This is where the thermostat downstairs was.
Thanks
Is that a 'blue' insulated conductor used as a 'live' link?
Sounds like the 'live' feed is switched on the CH ON terminal instead of Perm Live?
Sounds like the 'live' feed is switched on the CH ON terminal instead of Perm Live?
Reply to Permament Live to Hive multizone in the Central Heating Systems area at ElectriciansForums.net
News and Offers from Sponsors
- Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
- Sticky
- Article
Good to know thanks, one can never have enough places to source parts from!
- Electrical2go
- Forum Sponsor News and Offers
- 4
- 522
- Article
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
- Dan
- Forum Sponsor News and Offers
- 0
- 465
Similar threads
- Article
Hive thermostat multizone help Can anyone help me. I have just moved house and we have a boiler with a separate hot water tank and then 2...
- Rick1980
- Plumbers Forums
- 0
- 192
Unfortunately I don't think you will get an "off the shelf" diagram for the system you are trying to do
The Wiser system is very adaptable but it...
- mctb62
- Central Heating Systems
- 1
- 443
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
UK Why is neutral at 0 volts?Hi James, This is something I have struggled with too. Neutral is connected to earth so it is at...- Latest: HappyHippyDad
-
My alarm panel is going into alarm when entering the premisesIs there a detector on another zone / circuit that also is covering the exit route? Maybe try...- Latest: snowhead
-
Advice on Burnt out wall socketIf it's the one that is switched off saying lounge sockets it's a 20amp rcbo so maybe not a ring...- Latest: mainline
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.