some body bang on the door some body ring the bell

buzzlightyear · Oct 12, 2018

having been to a hotel with a fault on a lights and open and close system on a circuit .I had fixed the fault in which was the lighting .and Elvis left the building. about 1 hour after me left the building .
the customer rings up the entry will not work .well it work for going out
back to faulty towers again .
now this card reader has a fault on it .and want read any cards
I have now trying to get a replacement card reader I have posted the reader
so any of the gang to point me in the write direction.

[ElectriciansForums.net] some body bang on the door some body ring the bell

Leesparkykent · Oct 12, 2018

No pic buzz.

ruston · Oct 12, 2018

It's all that gear in his space suit . It has knacked the door entry system, and now the forum.

ruston · Oct 12, 2018

Duplicate post again.

Wilko · Oct 12, 2018

ruston said:
It's all that gear in his space suit . It has knacked the door entry system, and now the forum.

It's tough job to read and respond to posts for the last week. I'm hoping it's not just me?

buzzlightyear · Oct 12, 2018

buzzlightyear · Oct 12, 2018

I need the one like this its gone ape . I puzzles me when a fault happens and something else goes wrong you always get the blame .its got to be some metal in it .cause some one will rip it off the wall .

ruston · Oct 12, 2018

Wilko said:
It's tough job to read and respond to posts for the last week. I'm hoping it's not just me?

I am having trouble posting too, as you will be able to see.

GMES · Oct 12, 2018

ruston said:
It's all that gear in his space suit . It has knacked the door entry system, and now the forum.

It's not doing much for his typing skills either

I can't understand half of the post.

KEV 1 N · Oct 12, 2018

GMES said:
It's not doing much for his typing skills either I can't understand half of the post.

Why do Buzzes posts remind me of this guy...

The Ghost · Oct 12, 2018

Maybe you could replace it with a new card or fob reader wiring must be similar after all it's only a switch.

buzzlightyear · Oct 12, 2018

Vortigern said:
Maybe you could replace it with a new card

I have been on the tinernet and still searching to find a compatible

Dave OCD · Oct 12, 2018

It could be down to 'losing' the coding after being without power for hours. May be possible to reconfigure, haven't a clue how though.

buzzlightyear · Oct 12, 2018

Dave OCD said:
It could be down to 'losing' the coding after being without power for hours. May be possible to reconfigure, haven't a clue how though.

possible ,the customer kept trying new cards and none worked .good for going out by pressing the button going out . but cards don't work for some reason for entry .

123 · Oct 12, 2018

Get a company that specialises in door access etc to sort it. I doubt the hotel would be too happy to wait whilst you search the internet to find and source a replacement unit that could take a few days or longer to arrive, and might not even be the problem.