can anyone find one of these Starbreaker RCCB's?

HappyHippyDad · Nov 6, 2018

I want to give 30mA RCD protection to the right side of this board (see below)

[ElectriciansForums.net] can anyone find one of these Starbreaker RCCB's?

There is no main switch in this CU. Each RCD supplys the MCB's to it's right. I want to change the 100mA one for a 30mA one but I cannot find one. There are plenty of similar looking ones but these generally have 380/030s rather than just 380/030 as seen in the RCCB on the left. I'm not sure if they would fit?

Could anyone post a link to one that would fit? It could be a 63A or 80A one. The owner will not be changing the board. It's also still pretty neat given the age!

Also, is this how the board was designed to be? I.e without a main switch? Both RCCB's are fed from separate tails from a Henly block

Cheers.

telectrix · Nov 6, 2018

i may have 1 of those. give me a bit of time to root .

telectrix · Nov 6, 2018

got this..... 380/ 030. BS 4293. looks identical to the left hand RCD you have in the pic.

HappyHippyDad · Nov 6, 2018

telectrix said:
got this..... 380/ 030. BS 4293. looks identical to the left hand RCD you have in the pic.

View attachment 45523

Damn Tel that's good work!!

How much do you want for it? Plus remember to add on the postage!

Really appreciate this, you're a top man!

telectrix · Nov 6, 2018

you can have it for free. pm me your address. to offset postage, just a small donation to the Dogs Trust or RSPCA will be fine.

telectrix · Nov 6, 2018

you will need to test it. akaik, it came out of a working CU that was upgraded .

HappyHippyDad · Nov 6, 2018

telectrix said:
you can have it for free. pm me your address. to offset postage, just a small donation to the Dogs Trust or RSPCA will be fine.

I'll PM you my address and we'll have a discussion about payment (perhaps beer?)

telectrix · Nov 6, 2018

i don't want anything myself. see last post about small donation.

HappyHippyDad · Nov 7, 2018

So..... I put a post up yesterday saying I'm having difficulty locating an RCD. The same time the following day (i.e today) I'm back at the computer writing to say I now have one sitting in my kitchen!!!?

Not only did Tel have what I needed but he sent it out straight away and point blank refused any payment.

Tel is a top top man.

It is now being closely guarded by a ferocious cat!

telectrix · Nov 7, 2018

glad i could help.( but the next one will be £50.

.)

RAD · Nov 7, 2018

Tel,
You don’t happen to have another one identical to that do you? I’ve just had one fail on me today!! I’m more than happy to give you something for it if you do!

telectrix · Nov 7, 2018

don't know if i do. will have a look tomorrow

RAD · Nov 7, 2018

Thanks very much,

Really appreciate it

GMES · Nov 7, 2018

telectrix said:
glad i could help.( but the next one will be £500.00 .)

Altered that for you mate, now that the requests are pouring in.

telectrix · Nov 8, 2018

RAD said:
Thanks very much,

Really appreciate it

i've got a different one, similar to look at but it's the 1 with 2 busbar prongs on the back instead of 1.

GBDamo · Nov 8, 2018

telectrix said:
i've got a different one, similar to look at but it's the 1 with 2 busbar prongs on the back instead of 1.

What kind of shoddy service is that.

telectrix · Nov 8, 2018

GBDamo said:
What kind of shoddy service is that.

OK i'll cut 1 prong off and drill as hole for the lead. bit of gorilla glue to provide cable restraint.

RAD · Nov 8, 2018

Ah no worrries Tel!
Thanks for looking though.

can anyone find one of these Starbreaker RCCB's?

HappyHippyDad

-

telectrix

-

telectrix

-

HappyHippyDad

-

telectrix

-

telectrix

-

HappyHippyDad

-

telectrix

-

HappyHippyDad

-

telectrix

-

RAD

-

telectrix

-

RAD

-

GMES

telectrix

-

GBDamo

-

telectrix

-

RAD

-

Similar Threads

OFFICIAL SPONSORS

YOUR Unread Posts