Inspection and testing to the First Edition | Page 2 | on ElectriciansForums
Guest viewing is limited

Discuss Inspection and testing to the First Edition in the UK Electrical Forum area at ElectriciansForums.net

oracle

-
Arms
Joined
Feb 24, 2012
Messages
732
Reaction score
417
Location
Kent
Life was simple back in the day, raising a family and living in a shack. Then they invented electricity and people found life more exciting with a whole new way to die.

Electricity was and is dangerous and in May 1882 the first rules and regulations were made protecting people from shock, fire and death. Prophetically, these were called the First Editon.

They may have been old fashioned but they weren’t stupid, they knew by adding a few pages every couple of years they could change the number and charge more each time.

These first rules weren’t much, inspection involved the condition of “The Generator” and testing was probing circuits with electric currents. So how did they do this?.

Well, continuity was probably done with a bell and battery, nicked from a telephone, and insulation resistance with a hand cranked generator, also nicked from the telephone. After all these rules were for the Society of Telegraph Engineers and Electricians.

Live testing was probably by switching on to see if it worked, a practice that has persisted to today. So what do you think, were things really better in the olden days?
 
Pat wasn't in it that day , he was the day after.
He was supposed to be in that day.
Oi you 2 lay off will you, as Tel once said age is just a number, after the news I have just had the past few days I feel 21 again.

Pete it's like throwing breadcrumbs into a fish pond, the fish come up to take the bread and you take the bait, every time
 
If you look carefully it's made of non conductive materials, any additions are considered excluded from the rules
The Irish sparky looking after those chairs, got fired last week, he reported that the chairs were so badly maintained, they were a death trap and could kill someone, boom boom
 
So is Pete short for Peterick or is he just a bit short?
Dopey question there Oracalrick, Pat is also short for Patricia, the only one I'm concerned about.
Going off topic a bit Lads, shall we all grow up and act like the sensible people we like to think we are?
 
Dopey question there Oracalrick, Pat is also short for Patricia, the only one I'm concerned about.
Going off topic a bit Lads, shall we all grow up and act like the sensible people we like to think we are?

Only Patricia I know is Patricia the stripper

Patricia the Stripper 2000
Song by Chris de Burgh
Follow




[ElectriciansForums.net] Inspection and testing to the First Edition
Chris de burgh Patricia the stripper3:28 · YouTube

LYRICS
Dennis is a menace with his "anyone for tennis?"
And beseeching me to come and keep the score
And Maud saya "Oh Lord! I'm so terribly bored!"
I really can't stand it anymore
I'm going out to dinner, with a gorgeous singer
To a little place I've found down by the quay
Her name is Patricia, she calls herself Delicia
And the reason isn't very hard to see
She says God made her a sinner just to keep fat men thinner
As they tumble down in heaps before her feet
They hang around in groups like battle-weary troops
One can often see them queue right down the street
You see Patricia, or Delicia, not only is a singer
She also removes all her clothing
For Patricia is the best stripper in town
And with a swing of her hips she started to strip
To tremendous applause she took off her drawers
And with a lick of her lips she undid all the clips
Threw it all in the air, and everyone stared
And as the last piece of clothing fell to the floor
The police were banging on the door
On a Saturday night, in nineteen twenty-four
Take it away boys!
But poor Patricia was arrested and everyone detested
The manner in which she was exposed
And later on in court, well, everybody thought
A summer run in jail would be proposed
But the judge said, "Patricia
Or may I say, Delicia
The facts of this case lie before me
Case dismissed, this girl was in her working clothes!"
And with a swing of her hips, she started to strip
To tremendous applause she took off her drawers
And with a lick of her lips she undid all her clips
Threw it all in the air, and everyone stared
And as the last piece of clothing fell to the floor
The police were yelling out for more!
On a Saturday night in nineteen twenty-four
On a Saturday night in nineteen twenty-four
 
Oops

[ElectriciansForums.net] Inspection and testing to the First Edition
 

Reply to Inspection and testing to the First Edition in the UK Electrical Forum area at ElectriciansForums.net

Recommended Sponsor News

Exclusive Forum Offer! Free euro 2024 wall chart for first 10 responses!

Hi everyone,

We have 10 exclusive Uheat EURO 2024 Wallcharts to giveaway for Electricians Forum Members! The first 10 people to reply YES to this thread - I will message and get them sent out to you just in time for this years tournament! GO GO GO

Quickwire Now Sponsor ElectriciansForums.net

I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!

[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net


@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"

PCBWay Now Sponsor ElectriciansForums.net!!

I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.

Welcome to the community and thanks for your sponsorship!

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top