GSM Relay to gate motor | on ElectriciansForums
Click here to remove these ads

GSM Relay to gate motor

Discuss GSM Relay to gate motor in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

S

smp8

-
Joined
Jan 6, 2019
Messages
3
Reaction score
1
Location
Derby
Hi all

I would like to wire a GSM gate opener to my gate motor, but I'm not 100% sure about the inputs.

I would like to be able to call the GSM and have the gate open and remain open until I call the GSM again. My plan was to wire up the COM terminal of the GSM to terminal number '2' on the gate motor and the NO terminal to terminal number '3P'. Then check that the program on the motor 'F8' is set to 1. The GSM will be attached to a AC-DC 12v power converter.

I'd be grateful if you could let me know if I'm going in the right direction.

I've attached the wiring diagrams for both.

Many thanks

[ElectriciansForums.net] GSM Relay to gate motor [ElectriciansForums.net] GSM Relay to gate motor [ElectriciansForums.net] GSM Relay to gate motor [ElectriciansForums.net] GSM Relay to gate motor [ElectriciansForums.net] GSM Relay to gate motor

[ElectriciansForums.net] GSM Relay to gate motor

[ElectriciansForums.net] GSM Relay to gate motor

[ElectriciansForums.net] GSM Relay to gate motor

[ElectriciansForums.net] GSM Relay to gate motor

[ElectriciansForums.net] GSM Relay to gate motor
 

Reply to GSM Relay to gate motor in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Similar Threads

M
Wiring a Safety Relay to a Safety Interlocking Switch
What performance level are you aiming for? It’s whole body access, so Pld or Ple? This is pretty much the first port of call before deciding on...
Replies
2
Views
1K
netblindpaul
N
D
DC activated AC relay
Hello again everyone, it's been a while and I have not had a great deal of time on this project but hear is where it's at. I had one in the office...
    • Like
2
Replies
26
Views
2K
dave-novice
D
P
  • Question
Relay Design and Wiring
This contactor you suggested unfortunately only has two NO switches rather than 1 NC and 1 NO required for the CR3 current sensing bypass...
Replies
14
Views
1K
paulgill28
P
US1549
Comelit audio intercom handset unlock button not working
I have just removed the keypad module (art.3188) on a comelit vandalcom audio intercom and blanked it off. I installed a siemens K42 keypad lower...
Replies
0
Views
2K
US1549
US1549
HappyHippyDad
  • Question
Wiring a relay?...................
The relay worked as expected. A link was needed between L and L1. Only problem was the neutral terminal screw didn't tighten up, so he is...
Replies
17
Views
3K
HappyHippyDad
HappyHippyDad

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks