1 Way, Switch up is PIR and Switch down is perm on
Can someone explain how would the 2 way would work and is the drawings correct the load cable for the lights is from PIR as easier than wiring from switch thanks
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Discuss Manual override and PIR on lights in the UK Electrical Forum area at ElectriciansForums.net
Thanks that’s all I wanted, I will do some diagrams in a bit of these 3 methods so I can always have it and remember how it’s doneThere's 3 ways to do it.
Switch on the permanent live. This means the light can be turned fully off. Turning on the switch supplies power to the sensor, which in turn turns on the light when it detects something.
Common when you are replacing an existing light with a sensor version.
Over ride switch. Power is always on to the sensor - meaning it will work when it detects something, and will never be able to be switched off.
Combination of both of these. So the light can be always OFF, always ON, or sensor controlled. This can be done by a 3 position switch, or a combination of 2 x 1 way switches as per your diagrams.
It is the specification of the customer or the job in hand, so there is no right or wrong way out of those 3 options.
Also, there are some sensors that operate an override if you flick the switch on-off-on within a second.
hi thanks for your help are these diagrams I’ve drawn out ok? I appreciate you explainingThere's 3 ways to do it.
Switch on the permanent live. This means the light can be turned fully off. Turning on the switch supplies power to the sensor, which in turn turns on the light when it detects something.
Common when you are replacing an existing light with a sensor version.
Over ride switch. Power is always on to the sensor - meaning it will work when it detects something, and will never be able to be switched off.
Combination of both of these. So the light can be always OFF, always ON, or sensor controlled. This can be done by a 3 position switch, or a combination of 2 x 1 way switches as per your diagrams.
It is the specification of the customer or the job in hand, so there is no right or wrong way out of those 3 options.
Also, there are some sensors that operate an override if you flick the switch on-off-on within a second.
Thanks that’s all I wanted, I will do some diagrams in a bit of these 3 methods so I can always have it and remember how it’s doneThere's 3 ways to do it.
Switch on the permanent live. This means the light can be turned fully off. Turning on the switch supplies power to the sensor, which in turn turns on the light when it detects something.
Common when you are replacing an existing light with a sensor version.
Over ride switch. Power is always on to the sensor - meaning it will work when it detects something, and will never be able to be switched off.
Combination of both of these. So the light can be always OFF, always ON, or sensor controlled. This can be done by a 3 position switch, or a combination of 2 x 1 way switches as per your diagrams.
It is the specification of the customer or the job in hand, so there is no right or wrong way out of those 3 options.
Also, there are some sensors that operate an override if you flick the switch on-off-on within a second.
hi thanks for your help are these diagrams I’ve drawn out ok? I appreciate you explainingThere's 3 ways to do it.
Switch on the permanent live. This means the light can be turned fully off. Turning on the switch supplies power to the sensor, which in turn turns on the light when it detects something.
Common when you are replacing an existing light with a sensor version.
Over ride switch. Power is always on to the sensor - meaning it will work when it detects something, and will never be able to be switched off.
Combination of both of these. So the light can be always OFF, always ON, or sensor controlled. This can be done by a 3 position switch, or a combination of 2 x 1 way switches as per your diagrams.
It is the specification of the customer or the job in hand, so there is no right or wrong way out of those 3 options.
Also, there are some sensors that operate an override if you flick the switch on-off-on within a second.
Reply to Manual override and PIR on lights in the UK Electrical Forum area at ElectriciansForums.net