Aritech CS450 "Trouble" light on keypad | on ElectriciansForums

Aritech CS450 "Trouble" light on keypad

Discuss Aritech CS450 "Trouble" light on keypad in the Security Alarms, Door Entry and CCTV (Public) area at ElectriciansForums.net

P

Peter Morgan

-
Joined
Jan 16, 2019
Messages
7
Reaction score
0
Location
Devon
I have a Aritech CS450 which has been working fine for a number of years. All of a sudden the "Trouble" light came on the keypad.
I checked the logs and it showed "Fuses", so I checked the fuses - all ok
did a walk test - all ok
Tried an engineer reset - no different - light still on


The system seems to work as normal. i.e alarm trips if set and external sirens go off etc.

Anyone have any other ideas as to what my problem may be?
Thanks in advance.....
 
Charlie_ said:
Have you cleared the logs?
Click to expand...
Thanks for the prompt reply... How do I do that? In the user manual it just says :-
"The Engineer Log can store up to 150 events. It is
not deleted by an arming."
and
I can't find any reference to clearing this log in the user manual.
The operator log shows nothing as "stores up to 10 alarms and
faults that occurred since the last arming." and there have been no faults/alarms since the last arming.
 

Reply to Aritech CS450 "Trouble" light on keypad in the Security Alarms, Door Entry and CCTV (Public) area at ElectriciansForums.net

News and Offers from Sponsors

PCBWay
  • Article
Meet PCBWay at electronica A1.163
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
252
PCBWay
PCBWay
Electrical2go
  • Sticky
  • Article
πŸ“’ Best Sellers Catalogue Now Available! πŸ“’
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
724
Bob Labla
B
Dan
  • Article
The Official Sponsors of ElectriciansForums - There are currently 8
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
705
Dan
Dan

Similar threads

R
Alta Lab Ap6 keeps disconnecting
also check you don't have a bad cable are they poe or just running from a normal power supply from the wall
Replies
3
Views
629
BenCos18
BenCos18
lozarus
Providing Lighting from Motor Supply
Adding a led strip isn't going to make much difference to the 3 phase balance. No real difference to where a 3 phase machine uses one phase to...
Replies
2
Views
303
mainline
mainline

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top