-
Please checkout our new DIY Forum, and any trade that'd like to join and help out, and Contractor Talk Forum.
- Thread starter Steve Bittlestone
- Start date
- Replies 12
- Views 4K
-
- Tags
- bonding gas industrial supply
Discuss Industrial gas supply bonding. in the Talk Electrician area at ElectriciansForums.net
![[ElectriciansForums.net] Industrial gas supply bonding.](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/40/40977-6e93bdde27fba6cb35425b82b0490eb3.jpg)
![[ElectriciansForums.net] Industrial gas supply bonding.](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/40/40978-32032d9ac0778ba2263242538fa5f985.jpg)
You need something like this and you can get them for various pipe diameters.
12 to 38mm Heavy Duty Adjustable Pipe Bonding Earth Clamp (Sold in 1's)
Dry condition clamps
www.cef.co.uk
D
Deleted member 26818
![[ElectriciansForums.net] Industrial gas supply bonding.](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/40/40987-31c57be262abc511300550944eaa0bd6.jpg "[ElectriciansForums.net] Industrial gas supply bonding.")
This is what you need.
OP
Cheers lads,
Now I just need to source one the size of my forearm. Ha.
Thanks again,
Steve.
Now I just need to source one the size of my forearm. Ha.
Thanks again,
Steve.
D
davesparks
Any decent wholesaler will have something available.
That copper pipe looks like it goes a fair distance without any support.
OP
I don't do pipe fitting ha ha.
It's just an off cut that was standing in the corner when I took the photo of the steel pipe.
It's just an off cut that was standing in the corner when I took the photo of the steel pipe.
OP
![[ElectriciansForums.net] Industrial gas supply bonding.](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/41/41122-08aa558e77f209cc96b48ff89e97858d.jpg "[ElectriciansForums.net] Industrial gas supply bonding.")
OP
There you go.
Still waiting for the supplier for the clamp
Still waiting for the supplier for the clamp
Do the flanges need bonding jumpers across the flanges ?
OP
Due to a supplier delay, the gas pipe is now bonded via welded studs.
16mm earth via a stud on the pipe within 600mm of the consumer side.
Also cross bonded over joints too.
16mm earth via a stud on the pipe within 600mm of the consumer side.
Also cross bonded over joints too.
Do you mean following a continuity test to check?
Looking at the paint?.....I reckon it'll be OK.
OP
Those photos were prior to the studs being welded David. All is good. Job done and dusted.
Reply to Industrial gas supply bonding. in the Talk Electrician area at ElectriciansForums.net
Similar Threads
Thanks all for your comments, advice and suggestions. The following is probably pretty boring for most, and is simply a summary of how the job...
- Charlie_Don't_Surf
- UK Electrical Forum
- 8
- 489
Surface trunking.
I see that point . I’m going to have to run a new cable into the meter then at my cost. more than likely as I’ve finished the job now
- Km1777
- Electrical Wiring, Theories and Regulations
- 10
- 2K
- Question
There could also be a completely unsuitable junction box embedded within the wall and tiled over or just cables in choc blocks in old accessory...
- Broadway21
- UK Electrical Forum
- 6
- 823
- Question
No idea as I can't justify the cost of the crimping tool.
When I put my wet pants on it is usually the brass compression fitting I use as they...
- EquinoxElec
- UK Electrical Forum
- 8
- 1K
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
2 x t&e for 3 phase isolatorIt’s a C3. Somewhere in the regs (I would have to have a copy with me to remind myself where!)...- Latest: Rockingit
-
Song words.West BOUND And Down View: https://youtu.be/ZmXD_DKNuEs?si=u6f61VjJ2VN09CAx- Latest: littlespark
-
What pets do you have, and what pets have you had?Just to add to my bunny post above…. A picture my daughter painted a few years ago. We had...
- Latest: littlespark
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.