OP
Awhh I shall grab one tomorrow.
- Thread starter Ashley-Joseph
- Start date
- Replies 35
- Views 5K
-
- Tags
- commercial first mate
Discuss First day as a mate in the Commercial Electrical Advice area at ElectriciansForums.net
D
Deleted member 26818
10mm and/or 11mm open ended spanners for gutter bolt nuts.
17mm combination spanner for nuts and bolts (might also need 13mm).
Wide flat screwdriver for gutter bolts.
Heavy duty 12 inch hacksaw.
Hammer.
Measuring tape.
Set Square.
Might need a chalk line.
Fine point Sharpie.
Torpedo spirit level.
17mm combination spanner for nuts and bolts (might also need 13mm).
Wide flat screwdriver for gutter bolts.
Heavy duty 12 inch hacksaw.
Hammer.
Measuring tape.
Set Square.
Might need a chalk line.
Fine point Sharpie.
Torpedo spirit level.
![[ElectriciansForums.net] First day as a mate](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/41/41450-1343ae15ceee8e2a2b62c38db2c6f7f4.jpg "[ElectriciansForums.net] First day as a mate")
to be pedantic. the above is a try square. this is a set square:
![[ElectriciansForums.net] First day as a mate](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/41/41451-5f38f34366903c706991f988f89a7663.jpg "[ElectriciansForums.net] First day as a mate")
OP
I was taught with a combination square. That is most likely what I will get
.
under a fiver @ b&q. :
Magnusson Combination square | DIY at B&Q
This Magnusson combination square is made from hard wearing steel. It's perfect for detailed DIY tasks that need to be accurately measured.
www.diy.com
Best of luck today Ashley hope it all goes well for you.
Yeah hope all goes well Ashley.
I’m surprised that more isn’t made of this. Smart phones must be responsible for the loss of millions of working hours. They probably also present a safety issue.People tapping away on Cell phone Pees me right off, at work if I was Boss Man I would nail the phone to the nearest joist, no place for Cells at work, leave it for tea and lunch breaks, even then out of my sight unless it's life or death, bloody things
I know a wood mill we do work at it is instant dismissal if seen to be using one on the process line.
Timekeeping
Be there ready to work on or before agreed time.
There is nothing more annoying than hearing the words I am only 5 minutes late, what’s the problem?
Do not get caught standing round doing nothing.
If all else fails there is always some sweeping up to be done.
Ask questions about anything you are not sure on.
No question is a dumb question, unless it’s the 3rd time of asking it.
Enjoy yourself. Work should be something you like doing most of the time.
Best of luck.
Be there ready to work on or before agreed time.
There is nothing more annoying than hearing the words I am only 5 minutes late, what’s the problem?
Do not get caught standing round doing nothing.
If all else fails there is always some sweeping up to be done.
Ask questions about anything you are not sure on.
No question is a dumb question, unless it’s the 3rd time of asking it.
Enjoy yourself. Work should be something you like doing most of the time.
Best of luck.
How did it go, are you still at it
Yes mate stop keeping us in suspense
Of course he is, and he kept his smart phone in his pocket.
That's why he's not on here telling us all about it !
That's why he's not on here telling us all about it !
Reply to First day as a mate in the Commercial Electrical Advice area at ElectriciansForums.net
News and Offers from Sponsors
- Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
- Sticky
- Article
Good to know thanks, one can never have enough places to source parts from!
- Electrical2go
- Forum Sponsor News and Offers
- 4
- 683
- Article
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
- Dan
- Forum Sponsor News and Offers
- 0
- 625
Similar threads
- Question
Hi.
Sorry if this is not allowed, but I'm on the hunt for my first electrical role. I've completed C&G level 1,2,3 currently doing my 18th...
- lew_mcc
- Domestic Electrician Forum
- 0
- 156
Thanks for your advice bud, I actually spoke to a Gold Card holder over the weekend of whom gave me the same advice
- LaurenceYon
- UK Electrical Forum
- 2
- 447
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Viper clip gunI have the Milwaukee 12v cable stapler, it's brilliant! Does most of what I need it to do, can...- Latest: SparkySy
-
f changing halogen lights with led and driver .You would be modifying a single circuit and not in the zones of a bathroom, so not notifiable.- Latest: mainline
-
Questions regarding garage supply.The customer maybe better off getting an electrician to quote for the job.
- Latest: mainline
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.