Trouble with a new 3-way switch | on ElectriciansForums

Discuss Trouble with a new 3-way switch in the UK Electrical Forum area at ElectriciansForums.net

Joined
Mar 8, 2020
Messages
4
Reaction score
0
Location
New Jersey
Struggling with adding a 3-way switch. I have a feed with 2 wire, a 2 wire to the light, and a 3 way ran just to my new switch in one box; a simple over head light, and my second switch box with just the one 3 wire. My question is how exactly to wire at each switch, all I seem to get is power but no control at either switch.
 
Thanks for your response, please see attached. This is the box with the 3 lines (light, hot, and 2nd switch) the other box only has switch line.
 

Attachments

  • [ElectriciansForums.net] Trouble with a new 3-way switch
    7859EED6-D575-44EF-9223-A5145767E836.jpeg
    60.2 KB · Views: 8
  • [ElectriciansForums.net] Trouble with a new 3-way switch
    2C4DEB38-506C-440A-8633-8BB48269A1FB.jpeg
    137 KB · Views: 8
Assuming that is a two way switch then something like this. The black screw is common (C) the other two are L1 and L2. The bare earth go to the green screw, the neutral in and out to a wire nut.
[ElectriciansForums.net] Trouble with a new 3-way switch
 
Struggling with adding a 3-way switch. I have a feed with 2 wire, a 2 wire to the light, and a 3 way ran just to my new switch in one box; a simple over head light, and my second switch box with just the one 3 wire. My question is how exactly to wire at each switch, all I seem to get is power but no control at either switch.
Tsullivan you need a 3 way switch on both ends the live wire goes to the first switch terminal on top then you install 2 wires which are called travelers to the second switch bottom screws from the first switch and the black wire on the second switch hooks to the top terminal and goes to the light and the neutral goes straight to the lights
 

Reply to Trouble with a new 3-way switch in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Furthermore, as the left hand switch will currently not do anything, I'd try the loose brown in here:
Replies
4
Views
339
  • Question
Interesting that Avo 8 has brought Legrand into the conversation, as it certainly could be done with the Legrand IP55 switches I've used for about...
Replies
13
Views
775
  • Question
Ah yes my apologies, thank you much appreciated.
Replies
5
Views
817
  • Question
Double pole switches? Mounted on a grid module? Ignore the fact they have a N stamped on them. Or is your 2 gang switch decorative, and you...
Replies
3
Views
549
  • Question
Spent another 3 hours trying every possible combination and finally figured it out. Thanks anyhow.
Replies
6
Views
917

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks