Discuss flexible conduit adapter in the UK Electrical Forum area at ElectriciansForums.net
I have a 1-1/2 in. dia Non Metallic UL Liquid Tight Electrical Conduit with a straight connector.
Straight connector is a male fitting [twist], I need to reduce this to a 3/4 inch dia male [slip].
How do i do this? I can't seem to find a fitting?
-
Staff member
Arms
Supporter
I have a 1-1/2 in. dia Non Metallic UL Liquid Tight Electrical Conduit with a straight connector.
View attachment 59489
Straight connector is a male fitting [twist], I need to reduce this to a 3/4 inch dia male [slip].
How do i do this? I can't seem to find a fitting?
@ Vainglorious Welcome to the forum and it’s simple go to Lowe’s or Home Depot and buy a 11/2 reducing bushing to 3/4. They sell them all day
Reply to flexible conduit adapter in the UK Electrical Forum area at ElectriciansForums.net
Obviously not a building/DIY forum so will keep it short but yes - we've taken all the floors up. Several joists in the bathroom need doing as...
I’m running a feeder from main panel into spa panel that I’ll mount on exterior wall of house , will run through basement ceiling. Im thinking to...
DIYer here. I'd like to install an electric car wall charger myself. It calls for 6/2 romex which I have. Unfortunately my panel is in my...
forgot to add,,, use appropriate couplers etc. and the proper glue that melts the conduit and gives you a high. be careful if using a ladder, a...
Good Afternoon All,
So I have a new situation to me that I cannot seem to get a definitive answer for. I trained as an electrician and did...