Practice Rules (or Codes) for Running for Securing Multiple Cables | on ElectriciansForums

Discuss Practice Rules (or Codes) for Running for Securing Multiple Cables in the UK Electrical Forum area at ElectriciansForums.net

Joined
Feb 4, 2021
Messages
11
Reaction score
0
Location
new york
Rewiring an old home where basement lines will feed the first floor (multiple 15/20 Amp w/ 12/2 & 12/3 romex & a single 50 Amp 6/3 romex supplying range. If I run cables over a wall to feed the first floor, how often would do they need to be fastened/stapled, are there exceptions (such as when there isn't sufficient room), are there limitations to the number of cables that can run in close proximity with one another?

Details:

The basement has a concrete wall running parallel with joists has room above it to run wires. The last joist sits about 6 inches from the wall, so there is enough room to tuck the wires into the space, but not enough space to staple or fasten in that space. That being said, the wires are less accesible in that space than they would be if I were to staple them all to the last joist.

1) How many cables can be run together, For example, can 10 new 15amp/20amp lines be bunched together ?
2) Can 15/20 amp cables run together with a 50 amp cable (6/3 to range)?
3) Do cables sitting on top of a wall need to be fastened, and if they do, how often do cables sitting on top of a wall in a basement be fastened (every foot, every 5 feet, 10 feet etc? Or can I just secure all of them at the beginning and end of the wall if they lay flat above the wall?)
4) What is the best way to fasten them in a tight space (clamps to wall)?

[ElectriciansForums.net] Practice Rules (or Codes) for Running for Securing Multiple Cables
 
over here we tend to space the fixings of cables according to cable size. e.g. 12" for 1/2" dia. cable. the main thing is that the cables are adequately supported. (note that I have taken pains not to confuse you with the stupid metric sizes that we've had forced on us).
 
Rewiring an old home where basement lines will feed the first floor (multiple 15/20 Amp w/ 12/2 & 12/3 romex & a single 50 Amp 6/3 romex supplying range. If I run cables over a wall to feed the first floor, how often would do they need to be fastened/stapled, are there exceptions (such as when there isn't sufficient room), are there limitations to the number of cables that can run in close proximity with one another?

Details:

The basement has a concrete wall running parallel with joists has room above it to run wires. The last joist sits about 6 inches from the wall, so there is enough room to tuck the wires into the space, but not enough space to staple or fasten in that space. That being said, the wires are less accesible in that space than they would be if I were to staple them all to the last joist.

1) How many cables can be run together, For example, can 10 new 15amp/20amp lines be bunched together ?
2) Can 15/20 amp cables run together with a 50 amp cable (6/3 to range)?
3) Do cables sitting on top of a wall need to be fastened, and if they do, how often do cables sitting on top of a wall in a basement be fastened (every foot, every 5 feet, 10 feet etc? Or can I just secure all of them at the beginning and end of the wall if they lay flat above the wall?)
4) What is the best way to fasten them in a tight space (clamps to wall)?

View attachment 65040
Well the answer to number 1 would be no. You don’t specify what you mean bunched. Are you talking about wrapping the wire together with wire ties. Question number 2 is yes they can parallel to each other. Question number 3 is every 41/2 feet it’s required to be supported and you don’t need to worry about stapling in the voids of the wall on rework. Question number 4 is explanatory with question # 3
 

Reply to Practice Rules (or Codes) for Running for Securing Multiple Cables in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

  • Question
Hi There How did you get on with your basement project?
Replies
1
Views
971
DIYer here. I'd like to install an electric car wall charger myself. It calls for 6/2 romex which I have. Unfortunately my panel is in my...
Replies
0
Views
919
  • Question
I appreciate the input on this. I decided it is not a good idea, and will spend the money and time to install a new dedicated circuit with...
Replies
5
Views
1K
Before I pay an electrician to come check my work, I thought it worth a post here. I don't want to pay the cost of a small car for a whole-house...
Replies
0
Views
1K
There is simply too much to think about to even suggest cable sizes for this project. I must agree with my colleagues about involving an...
Replies
5
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks