Worlds fastest EICR ? | on ElectriciansForums

Discuss Worlds fastest EICR ? in the Electrical Testing & PAT Testing Forum area at ElectriciansForums.net

LukeD

-
Nearly Esteemed
Arms
Supporter
Joined
Jan 7, 2011
Messages
1,831
Reaction score
1,384
On My rented property >

Simple info

1. 9 way split circuit board .Twin RCD etc .
2. 2 x bedrooms . living room, hall and kitchen

total time in property : 25 min.

Testing done

1. test of both RCD's
2. I x socket per circuit tested .


NO lights tested , No remarks about massive damp around double socket and one of the sockets on that plate not working . No removal of C/B cover etc etc etc. No test of earthing/Bonding etc


Paper work to be sent over


No wonder this business is ----ed ...
 
Here is one socket alone ! left Gang dead in the water .very very corroded and messy inside
 

Attachments

  • [ElectriciansForums.net] Worlds fastest EICR ?
    IMG_4847.jpeg
    375.4 KB · Views: 43
Have you had a price or paid the bill?
 
Thats down to my landlord who has a habit of using the cheapest possible labour and thinking he can fob off tenants
Would be interesting to do a proper one... then send both to the NICEIC or whatever body he's with... see if they do anything about it. Tell them you'll send the verdict in The Daily Mail.
 
Would be interesting to do a proper one... then send both to the NICEIC or whatever body he's with... see if they do anything about it. Tell them you'll send the verdict in The Daily Mail.
THis has crossed my mind. Today was a " evidence gathering day" They left the check far too late .The 1st April was some time ago. I have evidence of his time in the property .NO plates /sockets removed . Not even a full visual. It was "one socket per room test " and a RCD test . This whole scheme was a farce and its never ever going to be policed . And every property management company can easily find someone to "Be a spark for a hour" and get someone else to copy and paste the document .This is how bad he was.... NOT One screw driver !! Just a Kewtech and a plug/wire/socket lead . I want to see the documents and who signed them first . Old saying "never go to war hungry"
 
Here is one socket alone ! left Gang dead in the water .very very corroded and messy inside

Not sure the usual "no damage to decor" limitation would excuse not removing that one...

I've been surprised by how much the reading can vary on outlets on the same faceplate...

The one benefit of testing on a non-RCD property - the Zs test is so much quicker!
 
THis has crossed my mind. Today was a " evidence gathering day" They left the check far too late .The 1st April was some time ago. I have evidence of his time in the property .NO plates /sockets removed . Not even a full visual. It was "one socket per room test " and a RCD test . This whole scheme was a farce and its never ever going to be policed . And every property management company can easily find someone to "Be a spark for a hour" and get someone else to copy and paste the document .This is how bad he was.... NOT One screw driver !! Just a Kewtech and a plug/wire/socket lead . I want to see the documents and who signed them first . Old saying "never go to war hungry"
If/When they do bother to chase things up and hand out any fines, it will likely be to individual landlords, rather than the big boys who have the money to put up an appeal if necessary and pick holes in the law....

A few of mine have slipped into April, but there are 'best effort' reasons for that generally with tenants being difficult or having medical issues.
 
Thats down to my landlord who has a habit of using the cheapest possible labour and thinking he can fob off tenants
I'm guessing you're planning on taking it further then? Good for you if you are.
 
I'm guessing you're planning on taking it further then? Good for you if you are.
I will await the certs arriving .Then Call the council Get it logged and ask for an immediate inspection as I believe this is very very common . And 10000's of tenants are been put at risk by greedy landlords
 
I will await the certs arriving .Then Call the council Get it logged and ask for an immediate inspection as I believe this is very very common . And 10000's of tenants are been put at risk by greedy landlords

The fault is not just with the landlords. This can only happen if dodgy electricians are willing to complete a sham EICR.
 
Landlords want 'cheap" and a landlord is responsible and knows what a EICR should entail etc . They cannot just excuse it and pretend they had no idea. Some landlords only pay £60 a check etc . it suits them to offer 6 flats and the landlord saves a fortune .The dodgy sparks earns very good money for the day .The tenant is living in a property that could have serious issues ? And what if the guys are not trained at all and just issuing certs ? NO ONE is policing this .Anyone can offer tests and run off with a a lot of money ?
 
Landlords want 'cheap" and a landlord is responsible and knows what a EICR should entail etc . They cannot just excuse it and pretend they had no idea. Some landlords only pay £60 a check etc . it suits them to offer 6 flats and the landlord saves a fortune .The dodgy sparks earns very good money for the day .The tenant is living in a property that could have serious issues ? And what if the guys are not trained at all and just issuing certs ? NO ONE is policing this .Anyone can offer tests and run off with a a lot of money ?

There are also good landlords who, understandably, do not know anything about electrics, and therefore put their trust in the electrician.
 
Landlords want safe but cheap in my experience. as long as they get their safety cert they are happy.
Likewise if something needs fixing they fix it.
But if they don't know something needs fixing due to carp EICRs then what can they do...
 
There are also good landlords who, understandably, do not know anything about electrics, and therefore put their trust in the electrician.
True ! But most landlords with multiple units and using management agents will KNOW
 
I left a rented place last year after being there for nearly five years, I'd not 'looked at' anything electrical on principle except that I knew the RCD's all worked. In moving out, I decided it was quicker just to swap out an old socket front that had paint on it rather than spend ages trying to clean it up. Took it off.... no cpc!! Found a second hand plate that was passable as 'original', swapped and moved on. I see the new buyers of the place had another spark's van parked outside for about a week.........
 
I left a rented place last year after being there for nearly five years, I'd not 'looked at' anything electrical on principle except that I knew the RCD's all worked. In moving out, I decided it was quicker just to swap out an old socket front that had paint on it rather than spend ages trying to clean it up. Took it off.... no cpc!! Found a second hand plate that was passable as 'original', swapped and moved on. I see the new buyers of the place had another spark's van parked outside for about a week.........
That’s all fine, until the neighbours tell the new owners the last occupant was a spark.... that’s maybe why you didn’t get the work?

?
 
That’s all fine, until the neighbours tell the new owners the last occupant was a spark.... that’s maybe why you didn’t get the work?

?
Nah, it's all a bit more complex and political than that! Besides, the old neighbour runs a commercial M&E and subs his electrical work to me!!
 
Artisan baker has a wee rant in his latest upload about trying to decipher another niceic installers drive by eicr

Drive by EICRS ? thats the common phrase round my area and we aren’t yet at the stage of requiring an up to date EICR in Wales yet like the landlords in England and Scotland. I can’t wait till it all sets off and I’m then asked to carry out fault finding on a recently tested property. Not many sparks can fault find which is shocking (excuse the pun)
 

Reply to Worlds fastest EICR ? in the Electrical Testing & PAT Testing Forum area at ElectriciansForums.net

Similar Threads

You are allowed a sampling process, i feel it would be impossible to I&T every point. If the client is prepared to pay for that so be, you can use...
Replies
8
Views
2K
Thanks for the reply littlespark. Yes the works have been carried out. Surely it is fraudulent because basically the document is Not...
Replies
2
Views
549
  • Question
If they got a shock then something cannot have been isolated.
Replies
7
Views
1K
TBH the real issue is not the rewrite aspect it’s the fact that every room in the house will now need redecorating because of having to cut in new...
Replies
25
Views
2K
This fella puts his face to it about halfway through, he has an opinion on the very subject.
Replies
42
Views
3K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks