Will an RCBO fit in the MK board?

HappyHippyDad · Jun 17, 2021

I want to change the 3 MCB's in the picture for RCBO's.
Will the MK ones fit?
Cheers ?

[ElectriciansForums.net] Will an RCBO fit in the MK board?

Dustydazzler · Jun 17, 2021

MK Sentry will fit , you can still buy them on EBay

westward10 · Jun 17, 2021

You can still buy them new.

MrPupsi · Jun 17, 2021

The new ones you can buy aren’t as deep as the old ones, meaning the buzz bar nib will need to be cut down a touch.

Or source an old one

HappyHippyDad · Jun 17, 2021

So will this one fit. New from screwfix..

MK Sentry 20A 30mA SP Type B RCBO

Order online at Screwfix.com. 20A 30mA SP Type B Curve RCBO. FREE next day delivery available, free collection in 5 minutes.

www.screwfix.com

There seem to a be a few different product numbers for them. Is there a specific product number that will fit my board? They either start in 69 or 79, will both fit?

HappyHippyDad · Jun 17, 2021

I have researched a little more and there are quite a few threads on other sites that say the MK RCBO's (69 and 79 designed for sentry 2 CU) need a retrofit kit in order to fit in the older sentry boards with the 59 MCB's in them. In other words they don't fit. Are you sure they fit @westward10 ?

There is also some talk that a wylex RCBO fits in the 59 sentry boards?

Gavin John Hyde · Jun 17, 2021

why not just buy 3 new circpro/mk rcbos and a new main switch at same time? as the RCD is fed via a fly lead inside? can use a busbar of choice then. dont have to worry about alignment between rcbo / main switch as all will be of the same version so align perfectly.

WIsh I had seen this earlier as i sold some rcbos that would have fitted that board on ebay.. would have let you have them for postage.

westward10 · Jun 17, 2021

HappyHippyDad said:
I have researched a little more and there are quite a few threads on other sites that say the MK RCBO's (69 and 79 designed for sentry 2 CU) need a retrofit kit in order to fit in the older sentry boards with the 59 MCB's in them. In other words they don't fit. Are you sure they fit @westward10 ?

There is also some talk that a wylex RCBO fits in the 59 sentry boards?

The only retrofit kits I know of were for the original Sentry boards which had the devices incorporating a slider type switch like these.

https://picclick.co.uk/MK-LN-59-5-6-10-15-30-114212734947.html

Dartlec · Jun 17, 2021

HappyHippyDad said:
I want to change the 3 MCB's in the picture for RCBO's.
Will the MK ones fit?
Cheers ?
View attachment 86806

I replaced a 6A in a board that I believe was this vintage fairly recently - it was MK old stock, bought from TLC and went in with no problems at all.

I believe the new Circpro are identical, except that they are now available in Type A.

Edit: - just looked back and my one are the slightly different layout (newer?), though same model - 5906

Dustydazzler · Jun 17, 2021

Loving all the pictures of split load MK boards , must have fitted literally hundreds. Were my go to board for ages

Dartlec · Jun 17, 2021

Anyone tried the new Circpro ones yet, with their snazzy black SPD?

Gavin John Hyde · Jun 17, 2021

Dartlec said:
Anyone tried the new Circpro ones yet, with their snazzy black SPD?

Yes, they are on some promo in Kew Electrical at present. not too bad, the MK slant isnt as bad as it was but do find the CU itself flexes and distorts easily if wall isnt perfectly flat when screwed back.
Does the job, I bought 4 of them to fit on eicr remedials and would use again.
My only gripe is there is no 40mm knock out for the tails

HappyHippyDad · Jun 17, 2021

Dartlec said:
I replaced a 6A in a board that I believe was this vintage fairly recently - it was MK old stock, bought from TLC and went in with no problems at all.

I believe the new Circpro are identical, except that they are now available in Type A.

Edit: - just looked back and my one are the slightly different layout (newer?), though same model - 5906

View attachment 86816

Are you saying that the 69 and 79 RCBO's fitted that board Dartlec?

Dartlec · Jun 17, 2021

HappyHippyDad said:
Are you saying that the 69 and 79 RCBO's fitted that board Dartlec?

The one I bought was MK7932S - this one, which fitted my board with no issues at all... Type AC was the only option at the time, but looks like the new Type As are now available....

This was the existing setup - I replaced the 6A for bathroom lighting/upstairs.

HappyHippyDad · Jun 18, 2021

Dartlec said:
The one I bought was MK7932S - this one, which fitted my board with no issues at all... Type AC was the only option at the time, but looks like the new Type As are now available....

View attachment 86827

This was the existing setup - I replaced the 6A for bathroom lighting/upstairs.

Thanks alot Dartlec, I'll give it a go ?

Will an RCBO fit in the MK board?

HappyHippyDad

-

Dustydazzler

-

westward10

MrPupsi

-

HappyHippyDad

-

MK Sentry 20A 30mA SP Type B RCBO

HappyHippyDad

-

Gavin John Hyde

-

westward10

Dartlec

Dustydazzler

-

Dartlec

Gavin John Hyde

-

HappyHippyDad

-

Dartlec

HappyHippyDad

-

News and Offers from Sponsors

Similar threads

OFFICIAL SPONSORS

YOUR Unread Posts