At 17min a little piece of me died

Dustydazzler · Jul 22, 2021

Dustydazzler · Jul 23, 2021

Dr electrician needed one of these…

telectrix · Jul 23, 2021

Dustydazzler said:
Dr electrician needed one of these…

bloody Philistine. now do your dead tests

Dustydazzler · Jul 23, 2021

telectrix said:
bloody Philistine. now do your dead tests

The simple answer is you don’t …

loz2754 · Jul 23, 2021

Just in case anyone didn't get the joke:
These guys did this for a joke!
The cable was not even connected to anything behind the socket.

Quite funny actually. ?

Pete999 · Jul 23, 2021

loz2754 said:
Just in case anyone didn't get the joke:
These guys did this for a joke!
The cable was not even connected to anything behind the socket.

Quite funny actually. ?

17 mins, as long as that?

littlespark · Jul 23, 2021

loz2754 said:
Just in case anyone didn't get the joke:
These guys did this for a joke!
The cable was not even connected to anything behind the socket.

Quite funny actually. ?

I admit I didn’t watch it, or listen…. Just fast scanned through looking for interesting bits…..

if it is a joke, do they clarify that anywhere on the video? Or are diy bods going to think it is real and copy it?

Mike Johnson · Jul 23, 2021

The problem is that piece of kit is available, I think they where serious: Cable Connector Wire Twist Twisting Tool Stripper Twister for Power Drill Driver | eBay - https://www.ebay.co.uk/itm/264122583968?

123 · Jul 23, 2021

littlespark said:
I admit I didn’t watch it, or listen…. Just fast scanned through looking for interesting bits…..

if it is a joke, do they clarify that anywhere on the video? Or are diy bods going to think it is real and copy it?

At the very end of the video they do

littlespark · Jul 23, 2021

123 said:
At the very end of the video they do

Well there you…. We are intelligent, sensible individuals and we didn’t make it to the end….
DIY Dave has no chance of staying that long, so will be straight onto Amazon to buy a cable wire twister upperer

telectrix · Jul 24, 2021

years ago i made my own twister, but not for cpc's. was to twist alarm cable pairs for inside the panels. something like:

[ElectriciansForums.net] At 17min a little piece of me died

Jim_e_Jib · Jul 24, 2021

telectrix said:
years ago i made my own twister, but not for cpc's. was to twist alarm cable pairs for inside the panels. something like:
View attachment 87950

I used to use one of these to twist cable pairs together when wiring up panels and that kind of thing:

https://mitersawjudge.com/wp-content/uploads/2016/10/hand-drill.jpg

timhoward · Jul 24, 2021

Jim_e_Jib said:
I used to use one of these to twist cable pairs together when wiring up panels and that kind of thing:

Snap - reliable old friend that it is….a bit of grease every 10 years!

buzzlightyear · Jul 24, 2021

I always carry one of those in me tool box for alarm systems. Especially for mixing cables. Lol.

telectrix · Jul 24, 2021

buzzlightyear said:
View attachment 87963 I always carry one of those in me tool box for alarm systems. Especially for mixing cables. Lol.

donuts.... mmmmm.

marconi · Jul 24, 2021

Others can say more but when I did my engineering degree we spent time in the workshops doing all sorts of crafts from tin-smithing, mould-making, precision machining, lathe work, pipework ...and electrical construction.

We spent a week preparing cables and wires for termination, soldering, crimping, or wiring up a motor control panel, or repairing a damaged multi-core cable and of course we started with wiring a mains plug and one of these multipin plug and socket connectors -

AMPHENOL MIL26 BAYONET-LOCK MULTIPIN AUDIO OB CONNECTORS - https://www.canford.co.uk/AMPHENOL-MIL26-BAYONET-LOCK-MULTIPIN-AUDIO-OB-CONNECTORS

At the end of the week there was a judgement panel and award session conducted by the workshop staff. Great fun and very useful to me in my later life when I was managing teams of technicians and engineers.

Learning not only the best and proper way but the art of doing it well time and time again and knowing why it mattered Something missing from sparky courses methinks.

Recently I managed a competition to supply and install two grid tied 6kW solar pv systems and I let the three bidders know that I would be evaluating their workmanship so wanted to see two examples from each of them. Pleasingly all were good. Maybe the solar pv and regeneration field see the value in good quality workmanship? When I asked the young (28) electrician who did the installation he simply said 'why not do an install to be proud of- it's an extra reward you give yourself for your day's paid work - a bonus like(sic)'. Nicely put.