-
Please checkout our new DIY Forum, and any trade that'd like to join and help out, and Contractor Talk Forum.
Discuss Bunker electrics! in the UK Electrical Forum area at ElectriciansForums.net
![[ElectriciansForums.net] Bunker electrics!](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/60/60101-a9e844c1746f11ec6c89e2981f66b7f8.jpg)
Deal, as long as you give me the £50k for the 15m2 of land that you'll need to reach it.
Sounds like a bargain to me.
I've only just realised my 'avatar' is a photo of the 'guard sheep' that was looking after the Pontypridd ROC post when I went to photograph it
i thought it was a selfie
@brianmoooore That is in excellent condition! Very jealous, there is one at the end of our drive, but it's original hatch and vent tube and antenna mount are long gone, it's very damp, all the original features are gone except the hand pump but that is inoperable. It now has a large concrete block on top of the hatch to stop the silly sheep from falling in it! I would love to own a bunker!
Sy
Sy
Just wait until the next lambing season up your way. I was working at Fallago Rig wind farm and Dunbar last week ?
Wouldn't we all. A true mancave. Only worry I would have is the wife locking the hatch when I'm in it ?
As long as there was tobacco spirits food and bog roll down there I would lock the hatch on it myself! ??
Reply to Bunker electrics! in the UK Electrical Forum area at ElectriciansForums.net
Similar Threads
It depends on how far through you are, if you are in the first half then I would suggest you switch over, if you are in the last third then see it...
- HH57567
- UK Electrical Forum
- 3
- 254
- Question
Hopefully the problem is found and easily fixed.
Take the opportunity to cut down the branches if they have the power off.
- trey0471
- UK Electrical Forum
- 5
- 1K
- Question
UK
Vitesse plus
We have some very old delmatic lighting control modules that have pcb and relays for switching they have mostly burnt out. I need to change them...
- johnashby
- UK Electrical Forum
- 0
- 320
Thanks mate for the advice, this is just what I was looking for. I think I’ll have to put some thought into the domestic route due to the NVQ and...
- Question
As above you will probably find the originals where oriented the same way and your replacements are upside down to each other, or visa versa. I...
- wriste05
- UK Electrical Forum
- 3
- 1K
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Would you use an old CU to extend cables.I have done similar in the past, although it was side by side, not one on top of the other. 2...
- Latest: James
-
375kw squirrel cage 415v motor starting issuesstart-up torque should be about 1/3 of the rated motor torque in delta.
- Latest: James
-
25mm swa armour for cpcThe csa of the armour is around 42.0 for a two core 25.0 cable.- Latest: westward10
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.