I have two hive zones. One for the house and one for the UFH in the kitchen.
When I boost the UFH from the thermostat or the Hive app the light on the Hive receiver comes on immediately, but the boiler does not fire and the valve triggering the UFH does not move. Basically nothing happens.
However, if I do the above and also boost the other Hive zone (in the hallway), straight away the valve opens, the pump starts and the UFH comes on immediately.
For this reason I think UFH receiver is wired incorrectly as it can't call for heat directly.
Can anyone see if it has been wired correctly? Cheers!
![[ElectriciansForums.net] Hive underfloor heating fitted incorrectly...?](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/61/61363-c9b42938db1e76ffca1f77eba61a4a43.jpg "[ElectriciansForums.net] Hive underfloor heating fitted incorrectly...?")
When I boost the UFH from the thermostat or the Hive app the light on the Hive receiver comes on immediately, but the boiler does not fire and the valve triggering the UFH does not move. Basically nothing happens.
However, if I do the above and also boost the other Hive zone (in the hallway), straight away the valve opens, the pump starts and the UFH comes on immediately.
For this reason I think UFH receiver is wired incorrectly as it can't call for heat directly.
Can anyone see if it has been wired correctly? Cheers!
- TL;DR
- Hive underfloor heating wired incorrectly as will not call for heat separately to other zone.
