-
Please checkout our new DIY Forum, and any trade that'd like to join and help out, and Contractor Talk Forum.
Discuss Mcb to fit MEM fuse carrier in the UK Electrical Forum area at ElectriciansForums.net
![[ElectriciansForums.net] Mcb to fit MEM fuse carrier](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/67/67861-eaf8300de89654049f2afeacfc07e442.jpg)
I have one MEM MCB of a similar vintage but have no idea if it will fit that CU.
Not much use I know but the newer, black lettered, MEMs are very different from the older red lettered ones.
Attachments
![[ElectriciansForums.net] Mcb to fit MEM fuse carrier](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/67/67862-9ceaff446ff98f354d73d9be14ec8881.jpg)
![[ElectriciansForums.net] Mcb to fit MEM fuse carrier](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/67/67863-ffee3f9ed1e49cfd20ba1786d7b8fef6.jpg)
There's also the 'commercial' range, which were branded 'Bill', if my hazy memory serves me right.
They're all interchangeable, except that (IIRC) at some point the 'fingers' on the bus bar were reduced in width, and later devices won't fit the earlier bar.
They're all interchangeable, except that (IIRC) at some point the 'fingers' on the bus bar were reduced in width, and later devices won't fit the earlier bar.
Contact MCB's.co.uk.....Great fella and will help with what you need
Reply to Mcb to fit MEM fuse carrier in the UK Electrical Forum area at ElectriciansForums.net
Similar Threads
- Question
All the lamp post cutouts I've ever seen have a twin swa gland plate built in to the base.
- Paulbrown95
- UK Electrical Forum
- 2
- 562
- Question
Its important to remember that a plug top fuse is just a rewireable fuse that's convenient to change and shouldn't be confused with a HRC fuse...
- clanky
- UK Electrical Forum
- 15
- 1K
- Question
Wallbox Fuse Box Lite Single Phase has anyone used one of these?
I've installed one feeding a Pulsar Max, the Pulsar Max is set to 32Amp max.
The...
- tony9i9i9i
- UK Electrical Forum
- 0
- 459
- Question
Nothing wrong with it.
Which manufacturers have you got this information from?
What do you mean by trip speed? Fuses and MCBs can operate in the...
- TheArcMan
- UK Electrical Forum
- 11
- 1K
- Question
It can be easy to lose the sequence of things.
If the fused spur has a neon indicator and this isn’t coming on then I wonder if
-the original...
- showerproblems
- UK Electrical Forum
- 6
- 606
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Would you use an old CU to extend cables.Like the idea of hinging the ply. It was in the back of my mind that if there is a fault back...
- Latest: MJS_84
-
EXTERNAL HALOGEN LIGHT WIRED DIRECTLY TO HALLWAY LIGHTING CIRCUIT - NO ISOLATOR / SWITCH ?Hello All, I hope that asking this does not annoy too many Members who think that the answer...
- Latest: chris murphy
-
375kw squirrel cage 415v motor starting issuesstart-up torque should be about 1/3 of the rated motor torque in delta.
- Latest: James
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.