Hi
I’ve recently installed a texecom veritus excel alarm system but having an issue with the sounder not going off when triggered by the pir
I’ve only got one pir wired in to the control panel and the other 7 zones are linked through.
When I try and do a walk through test the pir isn’t being picked up, however when I do a full set on the alarm, when I walk in it’s flashing blue green and purple like it is detecting movement however it’s not triggering the outside sounder.
I’ve checked the wiring in the pir and it all seems good, the tamper is sounding when I take the cover off.
Not sure if it’s a programming problem or a issue in the control panel that's not making the pir trigger the sounder
I’ve tested the sounder through the keypad and it works
It’s a d20 texecom pir if that helps
Thanks in advance
I’ve recently installed a texecom veritus excel alarm system but having an issue with the sounder not going off when triggered by the pir
I’ve only got one pir wired in to the control panel and the other 7 zones are linked through.
When I try and do a walk through test the pir isn’t being picked up, however when I do a full set on the alarm, when I walk in it’s flashing blue green and purple like it is detecting movement however it’s not triggering the outside sounder.
I’ve checked the wiring in the pir and it all seems good, the tamper is sounding when I take the cover off.
Not sure if it’s a programming problem or a issue in the control panel that's not making the pir trigger the sounder
I’ve tested the sounder through the keypad and it works
It’s a d20 texecom pir if that helps
Thanks in advance