HMDI Cable Connector Replacement

Hi All,

We've recently moved to a new build where the HMDI cable for the TV etc. are pre-fitted in the cavity of the wall. One end of the HMDI cable if damaged. I've tried taping a new HMDI cable to trying to pull it through the wall without luck... so short of removing the wallpaper and chasing out the wall to replace the cable completely I trying to replace the connector.....

I have bought a solderless HMDI connector from Amazon (shown in one of the photos... but it's not obvious how to wire) because I understand there are so many HDMI cable types and different colours can be used..... in this was several wires are grouped with coloured foil, but then all these grouping all have a red, a blue and a white wire.

The HDMI cable I have has 'HIGH SPEED HDMI CABLE WITH ETHERNET' printed on it and:

• 1 single lilac wire
• 1 single clear wire
• 1 single red wire
• 1 single brown wire
• 3 wires in GREEN foil - 1 red, 1 blue, 1 clear
• 3 wires in GOLD/BROWN foil - 1 red, 1 blue, 1 clear
• 3 wires in RED/PINK foil - 1 red, 1 blue, 1 clear
• 3 wires in BLUE foil - 1 red, 1 blue, 1 clear
• 3 wires in SILVER foil - 1 red, 1 blue, 1 clear

So, 19 wires in total

The HMDI connector I have bought has 20 locations which you can see in the photo.

Can anyone tell me which wire needs to go to which location number?

Thanks in anticipation.

Chris