MPBC to Gas Supply not required | on ElectriciansForums

Discuss MPBC to Gas Supply not required in the UK Electrical Forum area at ElectriciansForums.net

cliffed

-
Arms
Supporter
Joined
Dec 20, 2009
Messages
2,169
Reaction score
651
Location
Worcester
What’s your take on this….If the Gas pipe entering a property is plastic then no MPBC required.
This seems to contradict this with the gas pipe [ElectriciansForums.net] MPBC to Gas Supply not requiredto the meter is plastic then metallic to the internal
 
Last edited:
Sorry but I’m not seeing what is in fact confusing or contradictory about that.
Do you agree that if you stand inside the property there is nothing you can touch that is conductive to the real earth outside?

Maybe I’m over simplifying this and completely missing your point but I just look at each case and decide if I can grab hold of ‘real earth’ from inside.
 
The one thing to consider is it likely to become extraneous in the future.
I think my point of confusion is that there have been posts about plastic covered copper pipes, and posts about entirely plastic pipes (The pictures above have entirely plastic pipe, and a steel fitting with an insulated section.)
I agree they are two very different things.
 
Sorry but I’m not seeing what is in fact confusing or contradictory about that.
Do you agree that if you stand inside the property there is nothing you can touch that is conductive to the real earth outside?

Maybe I’m over simplifying this and completely missing your point but I just look at each case and decide if I can grab hold of ‘real earth’ from inside.
Yea I agree on that, with a water pipe its entry to the property must be plastic, & then no MBPC required.
The Gas pipe is plastic but not internal to the property, the metal pipework enters from outside to the inside of the property, is it an extraneous part most probably not.
The Regs insist on entry to the property must be plastic, in this case it’s not

I also like your way of thinking the real earth
 
is it an extraneous part most probably not.
Testing can sometimes be a help to ascertain whether it's extraneous or not.
The Regs insist on entry to the property must be plastic, in this case it’s not
Can you point out in the regs where they insist this ?
 
Last edited:
Testing can sometimes be a help to ascertain whether it's extraneous or not.

Can you point out in the regs where they insist this ?
Over exaggerating the words there…& yes testing would give you the result.
I’m just making a point about the entry to the property .. belt & braces would say MBPC do it.. but things have changed
 
I find diagram 3 especially of interest.If I,m understanding it correctly ,by inserting a valve including "electrical insulation" in the metal service pipe, then no bonding required.This could be a get out of jail card in situations where running a main bond back to the D.B. could be problematic.

The one thing to consider is it likely to become extraneous in the future.
I think thats a valid consideration in the situation in diagram 3.
 
I find diagram 3 especially of interest.If I,m understanding it correctly ,by inserting a valve including "electrical insulation" in the metal service pipe, then no bonding required.This could be a get out of jail card in situations where running a main bond back to the D.B. could be problematic.


I think thats a valid consideration in the situation in diagram 3.

No different to the use of an insulating coupling really.
 

Reply to MPBC to Gas Supply not required in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Although the gas pipe may no longer require the bonding, it should really be terminated correctly or completely disconnected at the other end...
Replies
2
Views
343
  • Question
4-5 hours for 150? no chance, this is 2024, 150 for 2 hours maybe, that said an hour seems pretty quick, not sure he did the job right
Replies
23
Views
2K
Thanks all for your comments, advice and suggestions. The following is probably pretty boring for most, and is simply a summary of how the job...
Replies
8
Views
487
  • Question
That’s why it’s worded “extraneous” pipe rather than incoming. Example there of a metallic outgoing pipe… still extraneous, requires bonding...
Replies
14
Views
3K
  • Question
I don't think it loops with anything else. The end of the earthing cable goes back to the fuse. Outside they installed this where they removed the...
Replies
6
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks