I am swapping a light switch in France for a motion sensor with two simple connections. The switch I wish to remove has two black into one connector a single black connector and two red into the third connector. It is paired with a second switch but I am happy to blank this if required or leave it permanantly in the on position. Earth wires seem to be an English thing 
What's the best solution?![[ElectriciansForums.net] French rocker switch for light has 5 connections 3 black 2 red](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/72/72720-d0e273fde284b4f843aa0dc0eeaecf83.jpg "[ElectriciansForums.net] French rocker switch for light has 5 connections 3 black 2 red")
![[ElectriciansForums.net] French rocker switch for light has 5 connections 3 black 2 red](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/72/72721-71fa7e85397c7bf87b55388a85bfa03f.jpg "[ElectriciansForums.net] French rocker switch for light has 5 connections 3 black 2 red")
What's the best solution?
- TL;DR
- How do I swap this old french switch for a motion sensor with two inputs
