Hi all,
Has anyone got any experience with Lemo jacks and sound powered phones? Our supplier can't provide us with anything pre-installed with a Lemo 6 jack, was wondering if anyone had terminated headsets before (I know the Lemo jack is used in aviation as well as marine)
Diagrams below:
Lemo 6
![[ElectriciansForums.net] Lemo 6-pin Connector to 3M PELTOR FLX2?](https://www.electriciansforums.net/attachments/1694146909029-png.110415/ "[ElectriciansForums.net] Lemo 6-pin Connector to 3M PELTOR FLX2?")
3M FLX2 110 Peltor
![[ElectriciansForums.net] Lemo 6-pin Connector to 3M PELTOR FLX2?](https://www.electriciansforums.net/attachments/1694146933932-png.110416/ "[ElectriciansForums.net] Lemo 6-pin Connector to 3M PELTOR FLX2?")
I was hoping to connect:
I was hoping if anyone would know if the COMM L / COMM R ports have enough power to deliver audio without the use of the V+ port from the sound powered phone.
Cheers!
Has anyone got any experience with Lemo jacks and sound powered phones? Our supplier can't provide us with anything pre-installed with a Lemo 6 jack, was wondering if anyone had terminated headsets before (I know the Lemo jack is used in aviation as well as marine)
Diagrams below:
Lemo 6
3M FLX2 110 Peltor
I was hoping to connect:
| Lemo Connector | Headset |
| V+ | Nothing / not connected |
| G- / Ground | Speaker Right Side Ground / Speaker Left Side Ground |
| COMM L | Speaker Left |
| COMM R | Speaker Right |
| Microphone | MIC HI |
| Microphone Ground | MIC LO |
I was hoping if anyone would know if the COMM L / COMM R ports have enough power to deliver audio without the use of the V+ port from the sound powered phone.
Cheers!
