Hive into Remeha Avanta | on ElectriciansForums
Click here to remove these ads

Hive into Remeha Avanta

Discuss Hive into Remeha Avanta in the Central Heating Systems area at ElectriciansForums.net

D

denxil

Joined
Dec 8, 2023
Messages
1
Reaction score
0
Location
Uk
Hi.
As per header. I just want to make sure I do this correctly.
Remove old wires from X9 7 and 8 and link these two (from another thread on here. Is this correct?)
X2: remove link between 1 and 4.
Hive neutral to 5,
Hive live to 4,
Hive 3 (live switch) to X2 1
Do I need to link L and 1 on the Hive plate?

Photo is of current set up plumbed into a honeywell thermostat.

Thanks in advance!

Dean.
 

Attachments

  • [ElectriciansForums.net] Hive into Remeha Avanta
    Screenshot_2023-12-08-10-47-20-98_cbf47468f7ecfbd8ebcc46bf9cc626da.jpg
    89.3 KB · Views: 8
  • [ElectriciansForums.net] Hive into Remeha Avanta
    IMG_20231208_103942.jpg
    229.2 KB · Views: 8
Hi

How did you finish the wiring? Please tell us so future members with the same problem can find the answer.

Many Thanks
 

Reply to Hive into Remeha Avanta in the Central Heating Systems area at ElectriciansForums.net

Similar Threads

r33eut
  • Question
Help Needed: Wiring Relay to Hive Thermostat receiver for Underfloor Electric Heating Mats
It's the policy on this forum not to give step by step advice. If you have an understanding of wiring requirements you will not have any...
Replies
1
Views
873
Avo Mk8
Avo Mk8
T
Wiring a Hive Heating Dual Channel Receiver SLR2C
That's just a standard timer switch. The 2 red wires to the timer are the switch contacts, the 2 blue wires are power to the clock. The 'orange'...
Replies
1
Views
1K
freddo
freddo
D
Hive mini with Remeha avanta exclusive - please help
Doing the above fixed it and is now working perfectly.
Replies
5
Views
4K
danz1man
D
EricMark
Improving control, oil boiler C Plan
As a "temporary" measure I went down a slightly different route. Nothing off the shelf appealed. In particular I wanted something with a good WAF...
Replies
7
Views
1K
Simon47
S
C
help with unvented cylinder, cobi with dual channel hive
No it can't, the instructions on the boiler clearly state that external controls must be fed from terminal 2 at the boiler. This kind of setup is...
2
Replies
39
Views
8K
davesparks
D

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tilers Community
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
NHS Forums | Forum for NHS Staff and NHS Patients
Back
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks