Does my UPS need a dual input supply? | on ElectriciansForums

Discuss Does my UPS need a dual input supply? in the UK Electrical Forum area at ElectriciansForums.net

Joined
Jun 29, 2023
Messages
38
Reaction score
15
Location
London
Hi everyone,

For a UPS serving as the secondary supply for life safety loads in a residential building (such as a fire fighting lift and sprinkler pump), would a dual input be required as shown in the photo below, or is a single feed sufficient?

[ElectriciansForums.net] Does my UPS need a dual input supply?
 
Hi Ibra,

Your profile says London, your IP addresses suggest Cyprus. I suspect the answer to your question very much depends on the local laws and regulations. If you are in fact in London, then talk to the building control team at the local council who may should be able to provide guidance or point you towards someone who can.

I've only encountered such a solution once, here in the UK, it was in a normal domestic (i.e. a three storey single occupancy terraced house) property where a sprinkler pump was being installed (the property had undergone extensive renovation and the fire doors which precluded the need for a sprinkler had been removed as it was made open plan). That had a relatively standard small UPS running on a single supply (cabling was all FP200 I believe).
 
Hi Ibra,

Your profile says London, your IP addresses suggest Cyprus. I suspect the answer to your question very much depends on the local laws and regulations. If you are in fact in London, then talk to the building control team at the local council who may should be able to provide guidance or point you towards someone who can.

I've only encountered such a solution once, here in the UK, it was in a normal domestic (i.e. a three storey single occupancy terraced house) property where a sprinkler pump was being installed (the property had undergone extensive renovation and the fire doors which precluded the need for a sprinkler had been removed as it was made open plan). That had a relatively standard small UPS running on a single supply (cabling was all FP200 I believe).
Thanks for your reply, I am in fact in London :)
 
The local fire brigade are normally keen to get involved in the planning stage and it can help prevent costly mistakes.
 

Reply to Does my UPS need a dual input supply? in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
265
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
756
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
740

Similar threads

Just stick the 63amp fused connector before the Henley block , or Lucy block as you call it, and your all good, as for your 2nd point, , the...
Replies
1
Views
988
Just doing some thread admin :)
Replies
1
Views
905

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top