Metal tile look-a-like roof. | on ElectriciansForums

Discuss Metal tile look-a-like roof. in the Solar PV Forum | Solar Panels Forum area at ElectriciansForums.net

Markc

-
Joined
Feb 28, 2010
Messages
1,013
Reaction score
147
Location
Norfolk
Survey today has raised an issue I'm not to sure about. I have an idea but not to keen on them.

The roof is made up from a light weight, metal look-a-like tile. The sheet takes the size of two rows of tiles and is about 1mt long. Each joint is lapped to the one above, below (Like laying bricks) They cannot be removed to allow roof anchor fixing so the questions are:

Does anyone know what this type of roof is called other than pain in the rear?

What roof anchors to use?

I'm thinking roof bolt as used for slate roofs but I don't like these due to drilling through the tile. Theres also not much to pull the gasket down to as a slightest amount of weight on them and they bow down.

I question their water tightness because of this.

Thanks in advance and pictures attached. [ElectriciansForums.net] Metal tile look-a-like roof.[ElectriciansForums.net] Metal tile look-a-like roof.
 
How are the sheets secured to the roof?

..........Yes? Not sure. I think they will start from the bottom and be nailed in place and use the ridge caps to cover the last fixings but I not sure. You can't lift one to see under it. It just will not move.
 
@Markc

Don't think you've got any choice other than roof bolts.

Two ways to solve the potential roof bolt problem of 'squashing' the covering, one is the way that Baxi say to do it (see my post in the Slate debate)

The other is the new schletter fixing which have a spacing sleeve, and anchor into timber, the sleeve stops the metal covering collapsing, I'll see if I can find the video links...

aha: YouTube - Schletter FixT Solar Mounting Roof Attachment (Featuring Wood Rafters) (they also have a fitting that goes on a single post, don;t have to do double)

and this : http://www.youtube.com/watch?v=n3g7EWEP_7Q

You can mix and match
 
Last edited:
@Worcester,

The Baxi is so similar to the Schuco bolt. I like the look of the Schletter bolt. Do you know where you can get these? if so would you mind and PM me.

The second issue is the ceilings are faulted and i have no idea where the roof timbers are.
 

Attachments

  • [ElectriciansForums.net] Metal tile look-a-like roof.
    rof bolt.jpg
    165.2 KB · Views: 27
Last edited:
[ElectriciansForums.net] Metal tile look-a-like roof. Click-Fit do one too.
 

Reply to Metal tile look-a-like roof. in the Solar PV Forum | Solar Panels Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
267
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
762
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
753

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top