Plate Switch inside a bathroom!

M

morph

• Apr 22, 2012

• #2

permitted item outside of zones

tin hat on

 

Upvote 0 Downvote

OP

Goody

-

Joined

Jan 21, 2010

Messages

638

Reaction score

94

Location

London

• Apr 22, 2012

• #3

morph said:

permitted item outside of zones

tin hat on

Click to expand...

True, but what if someone touches it with water dripping from their fingers?

 

Upvote 0 Downvote

S

sedgy34

• Apr 22, 2012

• #4

Goody said:

Hi,

I have just come across a Plate Switch mounted on the wall inside a bathroom to operate the ceiling light. Is there any alternative fitting to replace it (to conform with the reg) without resorting to installing a pull-cord switch? Any feedback will be much appreciated. Thanks!

View attachment 11988

Click to expand...

God you work late lol, pop a hole through the wall put outside the room

 

Upvote 0 Downvote

A

Adam W

• Apr 22, 2012

• #5

morph said:

permitted item outside of zones

tin hat on

Click to expand...

I agree - it doesn't necessarily have to be a pull switch just because it's a bathroom.
I suppose the alternative is some kind of SELV operated relay or suitably IP rated switch, although that might look a bit odd.

 

Upvote 0 Downvote

S

sedgy34

• Apr 22, 2012

• #6

morph said:

permitted item outside of zones

tin hat on

Click to expand...

is your tin hat permanantly fixed lol

 

Upvote 0 Downvote

D

Des 56

-

Nearly Esteemed

Arms

Joined

May 6, 2008

Messages

7,666

Reaction score

6,272

Location

Gliese 581C

• Apr 22, 2012

• #7

If you dont want to move it,maybe fit a fan isolator instead

 

Upvote 0 Downvote

A

Adam W

• Apr 22, 2012

• #8

Goody said:

True, but what if someone touches it with water dripping from their fingers?

Click to expand...

That might teach them how to use a towel.
Seriously though you could say that about almost anywhere - you should have a pull switch in the bedroom in case someone goes from the bathroom to get dressed in the bedroom, pull switches in the kitchen for when you're doing the washing up etc.
You'd end up with so many pull switches it'd be like living under a barrage balloon.

 

Upvote 0 Downvote

S

sjm

• Apr 22, 2012

• #9

If you can fit sockets in a bathroom, as long as they are 3 mts from the bath/shower, what's the problem with plate switches outside of zones?
I don't think the extra 2.4 mts will allow your fingers to dry while you walk it.

 

Upvote 0 Downvote

M

morph

• Apr 22, 2012

• #10

lets think about it
i have just had a bath smell good and slightly wet
i use switch in bathroom or 12 inches later on outside wall
whats the difference

 

Upvote 0 Downvote

N

needasparks

-

Joined

Nov 4, 2010

Messages

1,406

Reaction score

474

Location

Essex

• Apr 22, 2012

• #11

I fitted flush pir's in my wc and bathroom, they don't get left on and visitors are in there for ages looking for the switch to turn it off.

 

Upvote 0 Downvote

Guitarist

-

Joined

Jan 12, 2012

Messages

5,246

Reaction score

2,743

Location

Norfolk

• Apr 22, 2012

• #12

Nothing wrong with a plate switch outside zones.
Btw, what reg did u "think" prevented this?

 

Last edited: Apr 22, 2012

Upvote 0 Downvote

OP

Goody

-

Joined

Jan 21, 2010

Messages

638

Reaction score

94

Location

London

• Apr 22, 2012

• #13

I agree that REG only stipulates use of electrical equipment in the right zone but my concern was someone getting a shock with wet fingers, should the switch developed a fault at some point.

 

Upvote 0 Downvote

P

Plonker 3

• Apr 22, 2012

• #14

The regs for special locations to prevent spray of water getting in them.

Do you fit pull cords by the front door because they may come in when it is raining?

 

Upvote 0 Downvote

Guitarist

-

Joined

Jan 12, 2012

Messages

5,246

Reaction score

2,743

Location

Norfolk

• Apr 23, 2012

• #15

Goody said:

I agree that REG only stipulates use of electrical equipment in the right zone but my concern was someone getting a shock with wet fingers, should the switch developed a fault at some point.

Click to expand...

Even toilets in schools use standard rocker switches, more often than not with no RCD protection. The bathroom/shower room regs are due to the chance of touching something with lower resistance of your body after immersion, not to guard against wet fingers. As previously said, you could exit the bathroom and switch a light on a few feet away, or come in out of the rain dripping wet and switch a hall light on.
Outside of zones you can put whatever switch YOU, as the professional, deem suitable.
Hope this clears it up.

 

Upvote 0 Downvote