Hyundai panels | on ElectriciansForums

Discuss Hyundai panels in the Solar PV Forum | Solar Panels Forum area at ElectriciansForums.net

B

blades1898

Has anyone fitted these? Are they any good? are they better alternatives around the same price mark?
 
Fitted my first black framed Hyundai array the week before last. No particular problems. Same thickness as Sanyos, but have MC4 connectors on them so no need to be chopping off and crimping on new connectors. Would have used then before 12 Dec, but at their price Segen ran out of them immediately during the rush.
 
We use these over the Sharp range now and have done for a while now. Far better quality and the frames don't distort with the clip. Easier to line up and better output as well. 10yr warranty as standard. I'd have them on my roof.
 
Do they look better black framed? only a few quid more for the black frame rather than silver.
Black frame probably looks better to most people, but black does tend to attract heat - and solar panel efficiency declines slightly as they get hotter.
A number of fitters also grumble about how it can be quite difficult to avoid marking the black paintwork in the process of transporting, handling and fitting the panels.
 
We installed mostly the black 250w from Sept 2011. They look great and people do like the black frames over the chrome/ Ali in our experience. They are well priced and nice to fit. possibly a bit too pricey in our current market though.
 
Black frame probably looks better to most people, but black does tend to attract heat - and solar panel efficiency declines slightly as they get hotter.
A number of fitters also grumble about how it can be quite difficult to avoid marking the black paintwork in the process of transporting, handling and fitting the panels.

Trying not to scratch black panels is a tough call, we install LG often and they scratch before you've even touched them!
 
Fitted my first black framed Hyundai array the week before last. No particular problems. Same thickness as Sanyos, but have MC4 connectors on them so no need to be chopping off and crimping on new connectors. Would have used then before 12 Dec, but at their price Segen ran out of them immediately during the rush.
that's because we bought them all..... ;)

well, we bought the last pallet of 250s and last pallet of 245s. I think we installed 6 pallet loads of them in that period in total.

I've been really impressed with them, and using the same clips as the sanyos in most circumstances is really good as it means less different clip types to keep in stock. It was an issue when segen / schuco ran out of those clips in the Autumn, but we got around that by buying the silver clips and having a local firm anodise them for us.... fun and games.

We've also done some destruction testing on them with a football because we're planning an installation on a football stand, and can confirm they don't seem to mind having a football smacked against them.
 
Wouldn't recomment panasonic at current prices, Sunpower is now a far better option in the premium bracket.

We're still doing mostrly Hyundai, their price is higher than many of the offerings out there ATM but justifiable IMO as the quality is exceptional. Very rigid, well constructed box section frame at only 35mm, very sleek. Heres one i prepared earlier...

[ElectriciansForums.net] Hyundai panels

One word of caution tho, we lost a job recently quoting these against the Hyundai 218's, they come in a LOT cheaper. Customer thought we were too expensive but we were cheaper offering more expensive panels if you see what i mean, he didn't allow us the opportunity to explain the difference or requote using the 218's which we'd have beaten or matched at our normal pricing.
 

Reply to Hyundai panels in the Solar PV Forum | Solar Panels Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
268
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
762
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
755

Similar threads

You need to pass the job on to someone who is competent and up to speed with solar installs and regulations .
Replies
4
Views
664
Hi all, This may is a little odd and may take some getting your head around but here goes... I measured around half the load current on two DC...
Replies
0
Views
422

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top