PVSyst vs PVSol

Worcester · May 10, 2013

Here's an example of when you undersize too much:
14 x Sharp NU-R240J5 (240w) = 3360W
SMA SB3000HF (remember Gavin-A's commnents above)
I wouldn't consider that the 10/05/2013 was a particularly good day for generation, so on a GOOD day.

[ElectriciansForums.net] PVSyst vs PVSol

Ian-LS · May 10, 2013

Must be that time of the week but 14 x 240 W = 3.36 kW not 2.26 kW

Gavin A · May 11, 2013

also, IMO that's a good example of a well matched system - it may limit slightly at peak, but the inverter will operate on average at 0.6% greater efficiency throughout the year, which results in greater overall output per year per kWp installed than for 3kWp of panels on that inverter... and the extra generation is when you actually might use it rather than when it's mostly being exported (ok Immersun etc might change that situation a bit, but the point still stands) - figures from sunny design, and the logic behind them can be clearly seen from the efficiency curve of the inverters.

I don't really know why you've described that as undersizing too much.

Worcester · May 11, 2013

Sorry guys, it was late ... it was just to show the clipping effect.

polydecking · May 12, 2013

basically the max.input will be approximately equal to the pv array to achive a optimal utilization of the system

Berliner · May 13, 2013

thanks a lot guys for all your inputs. i had spoken to people and they suggested its always better to under size the inverter power by 10 % max. also came across the same suggested by SMA in this seminar they had given on inverters. https://www.sma.de/fileadmin/Partner/Solaracademy/Downloads/EN/IntensiveInverter-EN120910_web.pdf

So, the power, PV array voltage variation with temperature and the max current allowed by the inverter must be the factors.

PVSyst vs PVSol

Worcester

-

Ian-LS

Gavin A

-

Worcester

-

polydecking

Berliner

News and Offers from Sponsors

OFFICIAL SPONSORS

YOUR Unread Posts