board change | Page 5 | on ElectriciansForums

board change

Post new thread

Discuss board change in the UK Electrical Forum area at ElectriciansForums.net

G

GLENNSPARK

this is the board change i said i was on with this morning:

[ElectriciansForums.net] board changethis is the intake arrangements for the 4 flats

[ElectriciansForums.net] board changegetting a Ze=0.09

[ElectriciansForums.net] board changethe existing 4 way BS3036 board

[ElectriciansForums.net] board changeold board removed & finals broken out ready for IR and (R1 R2)

[ElectriciansForums.net] board change(R1 R2) at the furthest point on the lighting circuit=1.28

[ElectriciansForums.net] board changenew board going on

[ElectriciansForums.net] board changenew board straight & level minus cover

[ElectriciansForums.net] board changea closer look

[ElectriciansForums.net] board changeall dead testing has been done....IR was good...the lowest came back at
18 meg with nothing borrowed/shared ...now ready for the cover to go on & energise....Zs & RCD then sticker up and clean any mess made before leaving....:wink:
 

Attachments

  • [ElectriciansForums.net] board change
    Picture 004.jpg
    187.5 KB · Views: 338
Sort by date Sort by votes
MDJ said:
what that glenn looks like a convict hehe
Click to expand...

Yep. You should see him with customers when they ask for extra sockets that they haven't paid for/not in the quote. That man does not take any sh*t from anyone (last week proved that one lol). He had a face on him like he was chewing a wasp covered in lemon juice, customer backed down for some reason pmsl.
 
Upvote 0 Downvote
paul.m said:
Dont start talking about ladders with Glenn, he did'nt read the instructions on the side and fell off PMSL :rofl:

Nice tester you've got there Glenn, pity you left it in the back of the gaffers van yesterday and you had to borrow mine this morning. If you break it you pay for it lol. Anything to help out a mate :wink:
Click to expand...
yes thanks for that Paul....couldn`t have done without it....
i`l put it on charge tonite for you....
cheers..
 
Upvote 0 Downvote
I think it is very brave of you for putting your pics on here! If I was ginger, I wouldn't dare, just shows how brave you Scottish lot are!!!lol Only joking mate.....I know its strawberry blonde!!lol
I think that would be a good thread.....everyone post a pic of them selves, so we can put a face to the name! Ill start it off on this thread!!

[ElectriciansForums.net] board change
 
Upvote 0 Downvote
GLENNSPARK said:
hmm...thought it was only a matter of time before the word NVQ came up...lol..
if fact a mate of mine warned me about my pics being `stolen` off here for future use by someone....lol....
Click to expand...

Haha I'm not surprised mate, just been doing some of mine tonight and the series of pics almost matches identically to one of the units. Don't worry though, I'm about half the size of you and won't steal them, in fact I'm almost a wirey and stunted type :D
 
Upvote 0 Downvote
Thefailsafe2012 said:
Haha I'm not surprised mate, just been doing some of mine tonight and the series of pics almost matches identically to one of the units. Don't worry though, I'm about half the size of you and won't steal them, in fact I'm almost a wirey and stunted type :D
Click to expand...
well...i`m sure you could just `airbrush` me out of the pics or something...you would of course have to paste your own image in pose on them...and just hope you hands line up with the MFT/prods etc.....
i know this would officially make you an impostor but hay ho...
its amazing what can be done on a PC these days isn`t it....
 
Upvote 0 Downvote
GLENNSPARK said:
well...i`m sure you could just `airbrush` me out of the pics or something...you would of course have to paste your own image in pose on them...and just hope you hands line up with the MFT/prods etc.....
i know this would officially make you an impostor but hay ho...
its amazing what can be done on a PC these days isn`t it....
Click to expand...

Might do it anyway, but super impose Mila Kunis in instead and see if they notice
 
Upvote 0 Downvote
GLENNSPARK said:
right:
the pic shows me carrying out a Ze to the property....i do this before any board change to confirm there is actually a proper earthing to the property...
now, this being flats after i had confirmed there was a good earth to the building i then got a Zdb at the board before replacing it...
the PFC i put down was the one i got when confirming the Ze in the pic....its going to be higher than the one i get at the board isn`t it...so as far as i`m concerned its covered...
hope this clears up any confusion.
Glenn.
Click to expand...

dont bother trying to explain / justify your methods on here glenn to the chancers and goons who think they can score a couple of pedantic points , theyre not fit to lace your boots.
regards.
 
Upvote 0 Downvote

Reply to board change in the UK Electrical Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top