S
Simoniz
Hi
i bought "IR ON/OFF Motion Detector Sensor Switch from Mr Resistor, i wanted to install it in the bathroom, to switch on and off LED light above cabinet, after instalation switch doesnt work, Just hear click sound but doesnt switch off the lights, any ideas please? Where is the problem.
how I wired this
- feed 240V above wall cabinet, connected to the input (L and N) of " IR ON/OFF Motion Detector Sensor Switch " then from the switch to transformer for LED strip, from transformer to LED strip.
- transformer for LED strip parameters:
I/P: AC 100/240V 50/60Hz 1.2A
OP: DC 24V, 1.9A
- IR ON/OFF switch parameters:
The IR-sensor controller senses hand movement in front of the sensor eye (5cm-10cm) for on and off switching. It can be used to switch both mains and low voltage lighting.
Max Lighting Load 250W
http://www.mr-resistor.co.uk/item.aspx?g=&t=820&r=822&i=13610&a=0
Thank you.
simon
i bought "IR ON/OFF Motion Detector Sensor Switch from Mr Resistor, i wanted to install it in the bathroom, to switch on and off LED light above cabinet, after instalation switch doesnt work, Just hear click sound but doesnt switch off the lights, any ideas please? Where is the problem.
how I wired this
- feed 240V above wall cabinet, connected to the input (L and N) of " IR ON/OFF Motion Detector Sensor Switch " then from the switch to transformer for LED strip, from transformer to LED strip.
- transformer for LED strip parameters:
I/P: AC 100/240V 50/60Hz 1.2A
OP: DC 24V, 1.9A
- IR ON/OFF switch parameters:
The IR-sensor controller senses hand movement in front of the sensor eye (5cm-10cm) for on and off switching. It can be used to switch both mains and low voltage lighting.
Max Lighting Load 250W
http://www.mr-resistor.co.uk/item.aspx?g=&t=820&r=822&i=13610&a=0
Thank you.
simon
Last edited by a moderator: