dentist chair | on ElectriciansForums

Discuss dentist chair in the UK Electrical Forum area at ElectriciansForums.net

P

philjc61

Hi everyone, doing a job in a dentist, am i right in thinking that the chair comes pre wired, and just needs a 13 amp keyswitch with a neon. If any one has experience in this field would be grateful for any responses. thanks phil
 
I did a load of dentist chairs in a training school a few years ago. From what I can remember, all they wanted was a 13A socket and a data point for a remote monitor (training purposes).

[ElectriciansForums.net] dentist chair [ElectriciansForums.net] dentist chair

But it all depends on the specification of each chair. They also needed a water and compressed air supply for the power tools.
I can’t remember if we had an isolation point on the wall or not? Any case, all they had to do was lift the foot plate and switch off the socket.


Hope this helps.
 

Reply to dentist chair in the UK Electrical Forum area at ElectriciansForums.net

Similar threads

  • Question
Interesting item you have there. This blog might be worth a read https://sllipblog.wordpress.com/2014/04/29/its-now-00-28am-and-i-need-my-bed/...
Replies
9
Views
578
  • Question
I get quite a few people send me pictures of a socket or old fuse box and expect me to complete a fault find based off of 2 or 3 photo(s)
2
Replies
16
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top