Professional Electrician
These are nearly always for the Professional Electrician. And their fellow peers of course. To share electrical advice at a more skilled electrician-style guy or gal. That's not to say some budding sparkys may have some exceptions and limited access. Most of all - it's a professional electrician who is found hanging around in these question and answer forums.
Forums for the Professional Electrician
Welcome to the Professional Electrician forums. These are some of the most important areas of the forum. Our largest reader is the professional. We have domestic electricians, professional commercial and industrial electricians, along with the professional electrical engineers that tend to be the super experienced and well educated guys and gals with most of the answers to all electrical questions. Post your own new thread in the professional electrician forum, or reply to an existing thread.
Domestic Electrician Forum
Domestic Electrician Forum as requested by a regular member. Find all domestic electrical threads and discussion here.
- Threads
- 1.2K
- Messages
- 16.7K
- Views
- 4.4M
Security Alarms, Door Entry and CCTV (Public)
Security Alarms, Door Entry and CCTV (Public). Chat with other electricians about Security Alarms, Door Entry and CCTV Systems. This area of the forum is public, if you want the out-of-public area that's access only, then you need to apply for access and prove you're in the trade. For obvious reasons!!
- Threads
- 1.5K
- Messages
- 15.3K
- Views
- 5.9M
Commercial Electrical Advice
Discussions on Three Phase Supplies, three phase machinery and motors, DOL starters, phase sequence, running steel conduit, trunking and other questions on industrial and commercial electrical installations and maintenance. Commercial Electrical Talk. Also notice our Electrical Advice Forum and our Industrial Electrical Forum
- Threads
- 1.3K
- Messages
- 18.1K
- Views
- 5M
Talk Electrician
Talk electrician for all
installations can be discussed in this industrial electricians' talk forum. Electrician Talk Forum. Wiring, theories and regulations.
- Threads
- 2.3K
- Messages
- 28.9K
- Views
- 9.7M
Alarms, CCTV and Security Systems
CCTV and Alarms - Installation advice, guides and how-to's, how to reset alarm codes, etc - Checkout THIS thread to see how you gain access to this private area of the forum.
Private
The Electricians Arms
For professional electricians only. Checkout THIS thread to see how you gain access to this private area of the forum. You can discuss pricing, customers, wholesalers etc all without the risk of them seeing what you're saying, and what prices you're getting. We have some banter in this area of the forum too. And sometimes some music at the weekends.
- Threads
- 4.3K
- Messages
- 71.5K
- Views
- 817.7K
Business Related
Different Electrical Jobs, Self Employed, Competent person Schemes. General Discussion on all business related aspects of the trade. Thinking about going self employed? A change of electrical work? This is the place to be.
- Threads
- 3.3K
- Messages
- 37.4K
- Views
- 12.3M
Central Heating Systems
Please post all questions and discussion related to Central Heating Systems in this forum, from installing and wiring programmers, zone vales, room stats, tanks stats, wiring centres. Y Plan, S Plan etc.
If you're looking for plumbing related central heating discussion, visit our plumbing forum instead. If you're searching for advice on the plumbing related aspects of Central Heating then Plumbers link is there is for you.
If you're looking for plumbing related central heating discussion, visit our plumbing forum instead. If you're searching for advice on the plumbing related aspects of Central Heating then Plumbers link is there is for you.
- Threads
- 1.2K
- Messages
- 13.2K
- Views
- 6.6M
Electricians Software | Electricians Downloads
Free or paid-for software and downloads via the forum electricians resources area. Download Electricians Software.
- Threads
- 14
- Messages
- 69
- Views
- 44.1K
Popular Professional Electrician Topics
Those Transporters are hugely popular down here on the coast. Most have Kayak or surfboard on top "on the way to a job" :)
About as possible as anyone changing their monkey based avatar pictures to anything else….
Make sure you have the emails from the council confirming the email info was NOT from them or endorsed by them.
This sniffs like fraud /...
So are we finished at thirteen pages, hope that's not a sign. 😱
- Sticky
I've brought them back from Europe for about the last 30 years, but now, as a result of Covid restrictions and now an extremely aged dog, I've...
- Locked
This is nearly as ridiculous as your other thread which went similarly to nine pages. Contact your landlord to resolve this issue.
Thread closed.
A good portion of work I do is on equipment with inherently large leakage from cabs full of VSDs. Recently went to a job up north for a trial of a...
But how much time was spent / lost going and getting the bits you needed because you didn't have them on your van.
What is @M-B-Electrical-Services using now after a couple of years?
Thread was posted in 2022.
For additional information:
https://www.theregister.com/2021/11/26/bofh_2021_episode_21/
Lol. A few months too late, and it was neither the contactor or a voltage drop.
If you go back through the thread you'll see the videos.
Do you still want help with this or have you fathomed it out already?
Looks very nice that.
Excellent review and guidance, just read the whole thread as my programmer has just set the same issues:
1) Fixed screen with set time
2)...
On the 4th day God created this sun:
I have been stung before and have learned my lesson
Now EVERY job (above £50) gets terms and conditions and a quote / estimate together with...
Thanks very much Brian and to everybody else who has contributed to helping me resolve this issue you gents are fantastic and really generous the...
As a TU rep I wish this was true ! Unfortunately with the telesales like attitude towards membership numbers they will definitely take you on...
Just bumping this one again.
The boiler broke down again, had my regular repair guy out, it was the thermostat that had gone, he came yesterday...
It is yes, but it could all have developed from OUR old domestic 5/8 stuff used early and pre 60's...just folded steel with no chance of physical...
And the problems with most customer's are usually caused by the staff.
Irrespective of whether the load need an earth (CPC) or not, the earth wire in a plug should always be connected!
Some lights are...
Look for a good Independant Financial Advisor and take advice.
Everbody's circumstance is different, and want to do different things.
There are...
Never presume the fuse is okay.There werre a lot of recalls over fake fuses in domestic appliances.
The golden rule is to stick with the current brand of PLC used in industrial facilities. [Standardize] Plant maintenance (the true end-user) will...
Worth bearing in mind this thread is over 5 years old.
Welcome to the forum though.
No it can't, the instructions on the boiler clearly state that external controls must be fed from terminal 2 at the boiler.
This kind of setup is...
Thank you Marconi, yes some good advice from people that I appreciate, to be able to so called, bounce off, things change so quickly in this...
- James.B
- Commercial Electrical Advice
- 38
- 6K
The commercial unit is one that was being scrapped from work and the maintenance manager scrapped it my way :smile: Dad had it set up in the...
- itstony
- Commercial Electrical Advice
- 38
- 5K
How astute of you to put those two post together, sheesh. 🥱
A lot of the work I do is by word of mouth some of the people I have been doing work for in excess of 30 years and when it crops up that an...
I’m sure the smoke detector regs have changed since 15th December 2017. (When this thread was last active)
They do have NFPA 79 which would be their regional variant of the ISO standard
I'm suspicious of the binary pricing of the Cotherm thermostat in the marketplace - around £12 general outlets, around £30 from reputable...
Timbo you are correct in the joint box( wiring centre) and the neutral and linked live feed will go to pump from there, but there really needs to...
Has it's moments, certainly - Switzerland tomorrow. But...... like any job, it's mostly just damn hard work and long hours, you take the breaks...
Many thanks for this reply.
They're all crap imo. The reality in colleges up and down the country is they're understaffed, underfunded, full of people who don't care and the...
Just go slow and tell no one to speak as you concentrate.
Sooo the client has accepted that we don't want to be fraudulently taking electricity so that worry is out of the picture. But now basically the...
- SparkingMad1997
- Commercial Electrical Advice
- 32
- 5K
If you have space for some DIN rail then a MCB for the control feed is an obvious route to protection, or an HRC fuse using something like this...
On the face of it, 20k sounds a bit steep for 20 lights and a few sockets moving. I can't tell you how many suspended ceilings I have worked in...
heiet.org/career/professional-registration/engineering-technician-engtech-for-electricians/electrician-competence-recognition/
We are talking about a purpose made wiring centre, with relay fitted in it, that is supplied as part of the pump plan kit. The installer doesn't...
Very good point and one I warn people around .Customers providing materials are stupid. Its the best "get out of jail card " a trades person has...
It's always good when we can prove beyond doubt the cause of a fault with our nice expensive test gear, but once in a while you'll be up against a...
At the end of the day... it all boils down to what you're happy doing. For some, simple local 'house bashing' and trading as a sole trader works...
The main reason for using a ring on a straight run of conduit in this manner is usually because the person designing the install has the mindset...
Link failed.
-------------------------------------------------------------
Text copied from link:
I'm working on a current project where the...
It all comes down to cost vs clicks and I'm looking forward to seeing what strategy my web designer comes up with as far as promoting my business...
It is an exposed conductive part.
But it might not be in any way dangerous unless it also has the ability to introduce a voltage. So that means...
Maybe worth having a read.
https://www.electriciansforums.net/threads/y-plan-fault-damaging-programmer.169572/
Take advice from the HSE.
When I was on the electric board We had a pair of pillocks connect a housing estate to a very large genset, the n lead was in two parts and not...
£60 first hour if "booked" /£100 if urgent or after 6pm . Sundays the same . £40 per hour after that . BUT ....... Parking aint coming out of...
It actually gets worse.....
Wiring Diagram inside the cover door:
Now the manual:
Sod this on a Friday, I’m off for a cold one!!
(NB...
Anywho.....back to the OP's problem...so,you did the first month on a day rate,and didn't get squared,you then took on another job,did a month or...
Not much chance of an Arms membership.
He's really coming from the bottom........
Best advertising you can do is let happy customers do it for you . Just work out that many people want free quotes and hope to get advice through...
Search Electricans Forums by Tags
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
E-stopGood morning all, just after a wider view on this, we have a large control panel which allows...
- Latest: dave992
-
Plug socket disconnected live wire.no power to rest of sockets. Should I reconnect this wire?If recently purchased, you might have some recourse with the vendor, If none are working. Also...
- Latest: littlespark
-
Installed 6 new high bay lights. One went out already. Dimmer questionIs your dimmer rated for 1200 watts?
- Latest: Megawatt
Latest 10 Electricians Jobs
-
Electrician Jobs TT supply for hot tubHi, I have recently had a hot tub fitted and am not comfortable with...
- Started by gcwarr
- Replies: 15
-
I Need Work Im looking for a company to partner with JTL or work as an improver.I am based in Leighton Buzzard. I have been working in Central London...- Started by Ollie Walden
- Replies: 3
-
PAT Tester wanted Birmingham areaHi We are looking for someone full time, PAT experience not a...
- Started by dodge26
- Replies: 0
-
Looking for Commercial Electricians? - Some basic rules to followIf you're looking for Commercial Electricians then please click here to...
- Started by Dan
- Replies: 0
-
Installer wanted to supply and fit 6 station intercom Newport South WalesHi, I am looking for an installer to supply and fix a 6 station...- Started by UKMeterman
- Replies: 1
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.