Search results
Click here to remove these ads

Search results

You will need 50 posts under your account before joining in with this thread because you can't link out without 50 posts first.

  1. S

    Certification for shop rewire

    First of all it's not in a common area for all customers to access, I have seen this in a few premises in this area, it's a bit crazy to me!! I think maybe years ago the building mite have been owned by one company and then divided up! That's just my suggestion. As for the links in the fuse...
  2. S

    Certification for shop rewire

    Brilliant guys. I was just a bit puzzled!! Thanks
  3. S

    Certification for shop rewire

    At the main intake there is 3 fuses. One supply's the meter for the old rewireable single phase board which is getting changed and the other two fuses each supply a cable running back into void in the wall which travels upstairs to supply another customers premises so they must have their own...
  5. S

    Certification for shop rewire

    Hi guys, I am slightly puzzled about this, if a commercial ground floor shop is to get rewired using a single phase consumer unit and it has a three phase supply but only one phase is supplying the shop and the other 2 phases are supplying different property's upstairs not belonging to the shop...
  6. S

    Cylinder stat and pump wiring

    Dam boydy!! I thought I covered everything to perfection, well, for an apprentice anyway!! Excellent advice there though! When I read your reply I was like "why did I no think of that" haha! just shows you, everyday is a school day, thanks very much for further adding to my knowledge boydy...
  7. S

    Cylinder stat and pump wiring

    Hi guys. First of all I would like to explain I am an apprentice so I hope I ain't treading on anyone's toes by giving advice as I'm still learning myself! PICK use this site for my own training and rely on all you guys to offer me free information I need to get me along! In return I feel I...
  9. S

    Thermal store wiring

    Well it's a thermal heat store tank and it says it works in reverse of most conventional tanks with the hot taps running through a coil which is fed from the cold main and it heats when it passes through the mass of water. Like you suggested the burners run through a coil in the tank to. I read...
  10. S

    Thermal store wiring

    Well I'm not 100% sure as I don't understand it. I see what you mean though. I think the hot water taps are on a coil anyway, which ain't the way I normally thought it would be. If the hot taps ARE on a coil and the burners on another coil will tank stat not still put on pump and start to...
  11. S

    Thermal store wiring

    Ok, I'm a wee bit lost!! If he then puts on his immersion heaters to heat his tank for tap water and say if his rooms were cold would the room stat not call for heat and then the tank stat would call when immersion heated the tank and then the pump would fire?
  13. S

    Thermal store wiring

    Hey, thanks for the quick reply. No there is not a valve fitted. That's why we are scratching our heads as we need to meet with the plumber to see why there is no valves. Would you suggest fitting one?
  14. S

    Thermal store wiring

    Hi guys. I'm needing a bit of help. I was helping a guy fit a thermal store tank in his house for his heating. He has two wood burners connected to it. As far as I know the wood burners heat the mass of water in the tank but its actually a coil that runs through the tank at cold mains pressure...
  15. S

    Wiring systems

    Hi guys, for all your info. i went with SWA for my underground choice but had to choose any other wiring system that could even be a slight possibilty, so i just said SY cable in a duct but SWA was my final choice. Overhead system for one option i went with PVC singles in steel conduit on a...
  17. S

    Wiring systems

    thanks for the reply. i need 2 possibilitys for underground and then stick with one. going to go with SWA but i need another one just to have. thats why i chose split concentric, doesnt need to be 100% suitable, just a possibility. Overhead span is 8 to 10 metres. No public traffic, maybe site...
  18. S

    Wiring systems

    Hi guys. Im a adult apprentice currently on my 2nd year as a sparky and i am starting to struggle with the college work, help needed!!! I have to provide two possible wiring systems for underground and two for overhead in my college project. They are to supply an external pump house with 3...
  19. S

    Self employed

    well guys, thank you all for keeping me right. time to get my head down and get stuck in!
  21. S

    Self employed

    excellent, all the info i needed. thanks guys!! especially simpson93 for all the detail!! Thats exactly how i thought it would be, im a wee bit unsure of a bit of it. once i complete my apprenticeship, what happens if i got paid off straight away!! how do i gain 2 years experience to become an...
  22. S

    Self employed

    Hi, om new to all this so im needing a wee bit of help. im just about to start an apprenticeship and i am wondering how i would go about being self employed once i finish my time. I aint sure if i need to do a couple of years after i complete apprenticeship or can i start straight away. im...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks