Search results

Search results

  1. D

    Minor works but not a minor works?

    When connecting a new boiler into an existing switch fused connection unit and you are not modifying or extending any of the fixed circuit wiring, do you carry out the full range of tests shown on the minor works cert, with reference to a NICEIC version? Zs @ db R1R2 of the circuit up to the...
  2. D

    Extraction fans/part F

    Has part F now been modified with regards to notifications when installing extractor fans? It’s been many years since I’ve installed one but have heard that you must have attended a recognised training course, have a calibrated anemometer and complete a specific form for building control with...
  3. D

    UK What should I charge to install a EV charger

    How much of your day will the installation tie you up for, including travelling to and from the job, showing them how to use the app, certifying the job etc?
  4. D

    Gas Meter Pipework Bonding

    Although the gas pipe may no longer require the bonding, it should really be terminated correctly or completely disconnected at the other end. Don’t mess around with the cut end whilst the installation is energised.
  5. D

    UK Gas Bonding Certification

    Do a minor works for connecting the new gas boiler and add some notes regarding the addition of the bonding.
  6. D

    Maestro plug in ceiling rose

    Does anyone know where you could purchase one of these from nowadays? Need to replace one but not had much luck finding anywhere that has them in stock anymore.
  7. IMG_0307.jpeg

    IMG_0307.jpeg

    • diditrain
    • Media item
    • Comments: 0
    • Category: Lighting and Light Fitting
  8. D

    which hive for 2 x heating zones? (upstairs and downstairs)

    Pair one of them up initially and give it a designation/name i.e. upstairs heating. Then slot the other receiver onto the back plate and put the hub back into search mode and pair that one up and name it.
  9. D

    which hive for 2 x heating zones? (upstairs and downstairs)

    They won’t interfere with one another, you can have multiple hives on the same system. Pair them up individually by putting one receiver onto the back plate at a time.
  10. D

    which hive for 2 x heating zones? (upstairs and downstairs)

    If it’s a combi and you want complete independance of the heating zones then you will need two single channel Hive’s
  11. D

    Wiring Accessory Relay Panel into Classic Car - Questions..

    Looks very neat and organised.
  12. D

    "Next inspection due" labels

    Might be a good opportunity for someone to design an eicr label, denoting either satisfactory or unsatisfactory.
  13. D

    UK What electricians should I look out for as an apprentice?

    If you can get into commercial/industrial that would be my choice.
  14. D

    UK Shared income supply main fuse

    Distribution Network Operator
  15. D

    Adjusting tripping time.

    Is there definitely no manual override on the door?
  16. D

    Which way to turn?

    work can easily take over your life if you allow it to. I’m sure there are many who frequent this forum who have been or who are in a similar situation, myself included. Quite often, the realisation only materialises when something goes wrong.
  17. D

    Solar immersion controller

    Myenergy Eddie seems to be getting a lot of plugs on YouTube
  18. D

    Understanding wiring for wet underfloor heating?

    That should work. If your heatmiser is calling but your radiator stat is turned down, the rad zone valve should be closed. No heat to radiators. if your rad stat is calling but your heatmisers are not calling, then your heatmiser actuators should be closed. Seems to make sense.
  19. D

    Understanding wiring for wet underfloor heating?

    You should be good linking permanent live to LS in wiring centre or take it from boiler or double up from your fcu. Your choice. If you’re unsure, just remove the plug from the boiler and do all your testing first, before reconnecting it to the boiler. At least if it goes bang, you’re not...
  20. D

    Understanding wiring for wet underfloor heating?

    The RT terminal in the boiler is the switch return live.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top