Hi all,
I have been asked to design the electrics for a portable coffee trolley that is in development. It will have 7 different pieces of equipment on it (coffee grinders, water pump etc..) and will be run off a standard 3 pin 13A plug.
The total power of all the equipment comes to...
Hi Y'all,
hoping someone in here has some experience with satellite feeds....
As part of a rewire i've been asked to take a satellite feed into 4 different rooms for freesat. My question is do I simply run 4 separate CT100 cables from the quad LNB on the dish into each room or do I have to...
Hi all,
After rewiring a property the owner has been complaining of flickering lights on a lighting circuit in the lounge.
Sometimes when the dimmer switch is turned there is a slight flicker on the lamps.
The circuit has 5 wall lights on it with 2 x 45w halogen lamps in each (450w...
Hi all,
i've been asked by the local caravan park to connect 2 static caravans up to the supply. The caravans are used, so have a CU which purely need connecting to the isolation switch sitting next to the corresponding meter. was just wandering what certificate to issue? was thinking a full...
Hi all.
When upgrading a fuse box to a 17th ed. CU is it a legal requirement to get an isolation switch fitted, or can it be done live. Far from ideal I know, but the £90 price tag set by manweb puts a lot of customers off.
Thanks.
Hi all,
if using 2.5mm can i put a 16A MCB on a lighting circuit? never needed to before so a little unsure, but can't remember of they're limited to a certain amperage.
thanks
Hi there,
I've been asked by a farmer to replace the overhead cable going from the house to some of the sheds. The cable goes from the house to Shed A where it splits in a consumer unit and onto Sheds B and C. When calculating voltage drop to I enter the entire length (i.e. from house to Shed...
Hi all,
I have been asked by a local community centre for some advice changing some faulty 6ft strip lights to LED. As far as I can see 6ft LED tubes are Twice as expensive as replacing a ballast and tube but half the wattage (i.e. half the running costs).
does anyone have any experience with...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc