Search results

Search results

  1. I

    Eddy current clarification

    How so?
  2. I

    Click grid pro stuff

    with the gridpro kit we buy, the switches screw onto the back of the front plates with the tiny little screws provided with each switch. Eliminates the need for a yoke
  3. I

    Fire Alarm Relays 24V

    There’s a spare NO terminal on the fault relay but something already connected into the C and NC terminals. I believe they’re being used to send a signal to another panel so not sure if this NO could be used?
  4. I

    Fire Alarm Relays 24V

    PS. Would need to be a resettable latching relay. Just found online that you can get an extension board for with additional relays on but not sure how and if this would work. Exploring all possibilities at the minute.
  5. I

    Fire Alarm Relays 24V

    So update on this… all working well but need the relay to stay latched when the silence button has been pressed on the panel. Was looking to fit a latched relay inline between the panel and the contactor but can’t seem to find any. Any fire panel experts on here?
  6. I

    Fire Alarm Relays 24V

    I’ve seen plate relays with 24v supply in and 24v supply out terminals but this one hasnt and that made me wonder why and whether it could just be doubled up There’s already a lot of “this relay feeding that relay to allow for additional relays” going on within the panel so didn’t want to go...
  7. I

    Fire Alarm Relays 24V

    Good evening! Don’t have a huge deal of experience with fire alarms but having to work on a conventional system at the minute with various signals and “shut offs” being activated by the on board relays. All relay outputs currently used up in the panel but need to setup another “shut off” for...
  8. I

    Anyone around hackney : Job sorting out poor light connections in loft .

    Think we should end it on that note 😅🤦🏻‍♂️
  9. I

    Anyone around hackney : Job sorting out poor light connections in loft .

    Not sure, doesn’t look like there’s a sole in sight
  10. I

    Anyone around hackney : Job sorting out poor light connections in loft .

    It does but I’m not ruling it out… any-fin is possible!
  11. I

    Anyone around hackney : Job sorting out poor light connections in loft .

    If his loft is full of “carp”, that’s another issue in itself!
  12. I

    Eddy current clarification

    Surely my 1.5mm and 2.5mm earths going through their own hole will be OK then? 😂 Complete opposite end of the spectrum! Wonder if my NIC inspector would have hard feelings about it
  13. I

    What maximum amperage for cables

    All depends on length of runs and how they’ve been installed
  14. I

    Eddy current clarification

    I always thought they had the same effect on brass as I was once told brass bushes wouldn’t prevent the issue or is that because the brass bushes are drilled and fitted to the steel casing of a distribution board?
  15. I

    Eddy current clarification

    Just annoying when you’re a bit of a neat freak with a distribution board and know that taking the earths through their own hole at the top of the board makes it look so much better 😅
  16. I

    Eddy current clarification

    From memory though doesn’t the reg also say “and the appropriate earthing conductor” should enter through the same hole?
  17. I

    Eddy current clarification

    Has anyone found much difference in temperature when it’s only the CPC which goes through a separate hole? Line and neutral conductors going through together.
  18. I

    Poor advertising, how wrong is this?

    Very rarely use side cutters, always have my trusty CK croppers at hand!
  19. I

    Poor advertising, how wrong is this?

    Very observant!
  20. I

    Poor advertising, how wrong is this?

    If those cables are live and the snips survived it looks like terrific advertising to me!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top