Search results

Search results

  1. Colin188

    Cables in cavity of walls

    Is it permitted to run twin and earth in a domestic cavity wall?
  2. Colin188

    13amp single gang socket with rcd

    Thanks for the link
  3. Colin188

    13amp single gang socket with rcd

    Where can I purchase a 13amp white single sockets with rcd to fit a 25mm deep box. Needs to be a recognised wholesaler or retailer
  4. Colin188

    night tariff meter change to standard tariff

    Totally agree . Lets have a Red firemans switch external to each property to overcome this worry. Could be in the 18th edition! Would have solved all this
  5. Colin188

    night tariff meter change to standard tariff

    So with correct warning identification on each consumer unit this would meet requirements. If one cu was a shower cu then mark as shower, if next was garage cu then mark as garage, and the final cu would be marked main distribution i.e sockets/lighting making correct for emergency/maintenace...
  6. Colin188

    night tariff meter change to standard tariff

    I would assume that the double pole switch disconnections in each consumer unit would satisfy this as both consumer units are next to each other.
  7. Colin188

    night tariff meter change to standard tariff

    Just a reference on this.Hello, Please offer clarification as to whether regulation 537.1.4, or in fact any other regulation prohibits the common practice of splitting the mains supply from the meter, via Henley block to 2 or more CCU's? Each CCU in its own right has DP isolation. Does this...
  8. Colin188

    night tariff meter change to standard tariff

    I should be able to take two spur circuits off each of the two 32amp ring main mcb in the consumer unit. The sockets will be single socket outlets.
  9. Colin188

    night tariff meter change to standard tariff

    i think it would be easier if i can take the four 2.5mm t&e radial feeds from the economy 7 consumer unit and connect them to the main tariff consumer unit which has split load rcd and install 16 amp mcb for each radial circuit. this should cover all bases.
  10. Colin188

    night tariff meter change to standard tariff

    No they will not as i will not be changing the consumer unit. The only other way i can see around this is to supply the old ecconomy 7 consumer unit from a 32 amp mcb on the main consumer unit with 6mm t&e which has a double pole switch disconnector and a 30mA rcd and this should cover all the regs?
  11. Colin188

    night tariff meter change to standard tariff

    Have not enough room to install single point isolation. Cannot find any regulation that covers this. Would signage surface
  12. Colin188

    night tariff meter change to standard tariff

    As the meter tails would be under 3 metres I did not think that single point isolation was needed as the incoming house service fuse would suffice
  13. Colin188

    night tariff meter change to standard tariff

    I've been asked by a customer to remove four nights storage units and replace the switched fused spurs with single 13amp sockets. Each unit is fed from a dedicated consumer unit supplied from a economy 7 meter. I need to remove the meter tails from the night tariff meter and connect the consumer...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top