Search results | Page 2

Search results

  1. T

    0.06 meg Ohm could it be a load

    Would a load register as something like 0.06 Meg ohm on a circuit between N - E ( something like an unfused spur with the fuse removed? or is it just wishful thinking
  2. T

    swimming pool zones.

    Indoor pool, council I guess with public access
  3. T

    swimming pool zones.

    thank you :D Ahhh why would some one mount junction boxes and isolators at 2.46 meters its so close to being at 2.5m
  4. T

    swimming pool zones.

    the diagram is a bit wrong as the junction box and isolator are in zone 1 as is the conduit so if I'm reading it right 230 volt equipment wiring systems isolators and junction boxes all at 230v are allowed in zone one if they supply equipment that's in zone 1? seems kinda wild but then again...
  5. T

    swimming pool zones.

    pool cover is in zone 1 yes
  6. T

    swimming pool zones.

    the pool cover the junction box and isolator are all in zone 1 and or 2 they all supply the pool cover so does that makes it okay then?
  7. T

    swimming pool zones.

    I remeasured it and the junction box and the isolator are at 2.46 m and the conduit is a bit lower lower so its 230 v in zone one is that still allowed protected by and RCBO
  8. T

    swimming pool zones.

    its an electric cover with 230 v going to a box that controls the the cover that's at a height of 2.46m which makes it just inside zone 1 if that helps
  9. T

    swimming pool zones.

    Pool covers?
  10. T

    swimming pool zones.

    I remeasured it and the junction box and the isolator are at 2.46 m and the conduit is a bit lower lower they are both covered by an rcbo is that allowed the junction box is in zone 1 and the isolator in zone 2 they are both IP65 or 66 as far as i know
  11. T

    swimming pool zones.

    contractors have installed a pool cover and have situated the isolator and the junction box at just above 2.5m but the conduit running between them with the 230v cable in it goes down to 2.47m at its lowest point. Is that allowed or is it pedantic? please see poorly drawn diagram for more...
  12. 336194535_168756648949406_7363830435289752704_n.jpg

    336194535_168756648949406_7363830435289752704_n.jpg

  13. T

    Maintained emergency light

    was told it was not allowed but logically it does not make sense to be unallowed
  14. T

    Maintained emergency light

    Hi all can a Maintained emergency exit bulk head light fed from non lighting circuit if it is correctly fused and test point provided if no local lighting circuit is available ? so it is lit all the time and would be in the case of a power failure
  15. T

    Emergency Gu10 pack not working only with select bulb

    https://www.mlaccessories.co.uk/product/3303422/230v-gu10-led-emergency-pack has anyone used these before and if so do they have a compatible bulb I have only found one OSRAM bulb that seem to work with this fitting when it is switched on to its emergency battery any one any idea is Is it to...
  16. T

    SwitchDim lighting PIR

    Does any one know if a basic switchdim or touch dim ballast can be used with a Pir that's will dim the lights up and down in accordance with the level of light available? Or is it just dimming on a retractable switch
  17. T

    TT with low ze when bonding connected

    Does it matter that the gas supply provides a better earth than the earth rod though. In a fault would it just use the gas pipe as opposed to the rod
  18. T

    TT with low ze when bonding connected

    TT System with 31 ohm ze that drops down to 0.31 ohms when the bonding is all connected Am I right in thinking that's because a house nearby has been converted to a tncs and they share a common bonded gas supply?
  19. T

    Verso spd location on the din rail

    On the verso cu wiring diagram the spd is not after the main switch? Does the spd not have to be upstream of the rcbos
  20. Screenshot_20220424-101547_Chrome.jpg

    Screenshot_20220424-101547_Chrome.jpg

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top