Search results | Page 4

Search results

  1. moose

    Part M and Smoke detector

    Im not sure BS 7671 etc, says In old dwellings you can pick a height that the client wants, but im thinking i agree with you both, but i cant find the info or i wouldn't be here for basic help. Is there anything you can direct me to ive, looked at Part M and to me it states New and Wall changes...
  2. moose

    Part M and Smoke detector

    hehe :) To confirm that the principal heights are okay for the new rewire, and that i can leave out the smoke detector in the lounge, niceic make sure its okay with them.
  3. moose

    Part M and Smoke detector

    Hi all, Not done many full rewires to a domestic so to point. Client wants sockets to be 400mm (i thought okay as it could be still Disabled height infact as well what if they wanted them lower?) Client wants his Light switches to be at a lower level of 1300 (original height was about 1400...
  4. moose

    Neutrals in light switch

    Wish I had the pictures of the one i visited the Neutrals and Earths together in the Galv back box Even had tape and a DNO tag on it LMAO.
  5. moose

    Cable Calc ?

    Thanks guys this is what i was missing the foil the reading is defo on about par with the readings you have mentioned, the reason for not mentioning the Phase and Neut was because they are not in a loop like a ring only the Earth was a Loop, being a Analogue System (Addressable..(NOt continues...
  6. moose

    Cable Calc ?

    Hi guys im having a brain storm of absolute brain death. Fire alarm Loops of around 600m and 500m Give or take FP 200 1.5mm (1100m Total cable not accounting for Cutting to much cable etc) My problem is this, the 2 Loops of cable gave me a resistance Value of about 3.07ohms cpc to cpc and...
  7. moose

    Bit Of fun Problem..

    lol i was looking at something else when i was doing this, Chopper76, well done, i must stop taking the bladder pills l8 at night. sry m8...
  8. moose

    Bit Of fun Problem..

    Yes it was a neutral fault but the question was where in the circuit, the answer was brill, but remember you cant just say its a neutral fault then walk away, there has to be more investigation, Im glad you got this far knowing the chaps on here with a great sence of humor u all have.. LMAO..
  9. moose

    A day in the life of....

    I suppose you have a van and get the money for diesal etc, well im in my car and drove like this for nothing, never again. Now i work for a gentleman and a scholler and get some money for using my car for milage.
  10. moose

    Todays little bit of joy

    Do you mean to say all yours dont look like this, it must be your gaffer saying hurry up its time and money. LMAO
  11. moose

    Main db change

    Actual test that should be done are the Sub board as this is the main board like a DB in a house, only the circuits you change so sub boards are not necacery(lol spell) to be tested, only the feeds to the boards etc.
  12. moose

    Bit Of fun Problem..

    hmm so jokes are better than actuall finding the fault im guessing there is no takers then, the actual fault was at DNO OND rofl, yep its a neutral fault, mains incomer Neutral was not connected. The megger reading was a reading that is given as a two wire test and im thinking the fault would...
  13. moose

    Bit Of fun Problem..

    I love the RCD song nice hard work gone in to that, The power(Line) is On and passing through the RCD. There is a Neutral Fault in the circuit maybe where. :) at the DB I use a Megger set to say HI and get a reading of 0.17ohms .
  14. moose

    Bit Of fun Problem..

    Nothing Hard just a fault that could occur. At DB the RCD seems not to function pressing the test button also notice while pressing the button it changes the LEDs on the Plugin tester, which is plugged into a local socket, the Plugin tester lights are saying Line to Earth reverse also notice...
  15. moose

    final 2391

    Congrates m8, this is where you have no excuse to get anything wrong, LMAO, Every one watching you to sort out the problem and time is, well its home time, hehe. But i feel this time is better as you get payed more, LOL.
  16. moose

    Volt drop cable calculator

    Length x Design Current x (Mv/a/m) x Factor(1.20) then Divide by 1000 Trada
  17. moose

    Could really do with some help!

    Did you check the loft for a Weed infection if you know what i mean, there have been a few of these reported, remember these lights can give off some amazing use of power :)
  18. moose

    ECS Card

    The question is do you have a card now from the ECS JIB or not you may have to apply for the CSCS to get the card. But as stated the card usually comes with your appretaship scheme you did.
  19. moose

    Main Bonding Plastic Water Pipe

    I have had this issue with a few new constructions in properties, the Incoming Pipe PVC and the Rest of the pipe work also PVC this also includes all heating in PVC, so the new good practice would be to bond all the Heaters with a Radiator clamp and back to good old Cross bonding everything...
  20. moose

    Apprentice Wage Help!?!?

    Lol Ive seen some very bad sparkies on apprentiships they go through it like its gods gift. Depends on the lad and education they recieve on sites... ÂŁ2.95 is very bad, but you get all your qualifications and experience on the job, (Price them up yourself, you dont do 17th and Test inspection...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top