I cannot remember the exact price I was quoted but it was a lot and was just before lockdown last year . So the job got put on the back burner and I had forgotten all about it?
So what is the reason for a cpc in final circuit that is supplying a class 2 fitting in a commercial environment.Is this a regulation requirement. I agree it's required in a domestic environment as a class 2 light could be easily changed with a class 1 fitting by the home owner .
Wire a house years ago with another spark .Turned on power all ok but one of the rings had no power at any of the sockets. After an hour of testing and trying to trace what the issue could be we realise neither of us had taken the legs back to the board
? .
As a above you just need the conversion leads to do the tests basically they are leads with a 240 volt plug on one end and an 110 volt socket on the other .
As above but just to add it may be difficult to fit a dimmer switch . As a dimmer takes up a lot of space and the terminals tend to be small . I personally would not be wanting to swap that switch force dimmer
Check the din rail connection the pole star mcbs have 2 different sizes one fits a single phase board the other fits a 3 phase board as it had a larger terminal where it fits onto the bus bar.
But is the ceiling
But is it classed as a fire ratted ceiling normal not require in a single dwelling such as a house . If the cieling is just single 8mm plasterboard then it is not a fire barrier. Then fire ratted down lights are not required . If there is a flat above then it may require to...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc